{"product_id":"clevo-w255cew-replacement-battery-108v-5200mah-li-ion","title":"Clevo W255CEW Replacement Battery 10.8V 5200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eClevo W255CEW \/ W130 Series — 10.8V Li-ion Replacement Battery (W130HUBAT-6)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 5200mAh (56.16Wh) Li-ion replacement battery for the Clevo W255CEW and W130-series notebooks. It uses OEM part number W130HUBAT-6 and cross-references 6-87-W130S-4D7, 6-87-W130S-4D71, and 6-87-W130S-4D72. Physical dimensions are 204.90 × 48.75 × 20.50mm — confirm your original before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eW255CEW and W130Ex\/Hx\/EV compatibility:\u003c\/strong\u003e\n    These models share the same battery bay dimensions, connector pinout, and BMS handshake protocol. The W130HUBAT-6 part number covers all variants because the voltage rail and cell configuration are identical across the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and load cycles on W130-series hardware. The BMS communicated correctly with the system board, charge termination triggered at the expected cutoff voltage, and the fuel gauge IC accepted the new cell data without flagging a fault.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration on the W255CEW:\u003c\/strong\u003e\n    After fitting, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health immediately after swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe W255CEW BIOS reads health data stored in the outgoing cell's EEPROM. When a new cell goes in, that EEPROM data resets to factory defaults, which the BIOS interprets as a mismatch — it flags health as poor or unknown before any charge cycles have run. This is not a fault with the replacement cell. Run one full discharge-to-hibernate followed by an uninterrupted charge to 100%, and the BIOS learn cycle will rewrite the health register against actual cell performance. After two to three cycles, the health indicator stabilises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shuts down at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC calibration is still based on the old, degraded cell. The percentage displayed does not match the new cell's actual voltage curve, so the system hits a hard voltage floor under CPU and display load while the gauge still reads 20–30%. The fix is calibration, not a hardware fault. Discharge fully to automatic hibernate, then charge to 100% without interruption — repeat this two to three times until the gauge tracks correctly against 10.8V nominal and the 9.0V low-voltage cutoff.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409678073946,"sku":"BWCS-CLW255NB-1","price":96.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409678106714,"sku":"BWCS-CLW255NB-2","price":113.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409678139482,"sku":"BWCS-CLW255NB-3","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CLW255NB-1.webp?v=1779580400","url":"https:\/\/batteryweb.com\/products\/clevo-w255cew-replacement-battery-108v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}