{"product_id":"code-a-phone-3150-replacement-battery-36v-600mah-ni-mh","title":"Code A Phone 3150 Cordless Phone Replacement Battery 3.6V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCode A Phone 3150 \/ 7010 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 600mAh Ni-MH replacement battery for Code A Phone cordless handsets. It fits the 3150, 3260, 7010, and 7015 series, along with three additional compatible models. Same voltage, same chemistry, same connector footprint as the original pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3150 \/ 3260 \/ 7010 \/ 7015 platform fit:\u003c\/strong\u003e\n    These models share the same 3.6V NiMH cell format and base-station charging circuit. The BMS handshake is passive on this chemistry — no digital authentication to worry about. Voltage and connector geometry are what matter here, and both match.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a DECT handset platform. The NiMH cells accepted full charge current from the base cradle without triggering a charge-fault light. Capacity came up to spec by the third cycle, which is normal for NiMH chemistry.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before the first use. NiMH cells ship partially discharged from storage. A slow first charge lets all three cells in the pack balance properly and reach rated capacity from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than original battery after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells need three to five full charge-discharge cycles before they hit rated capacity. A new pack straight from storage will underperform the original for the first few uses — that is not a fault. Run the handset until the low-battery beep triggers, return it to the base for a full 16-hour charge, and repeat. By cycle four, capacity stabilises at the 600mAh rating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no-charge or error light after installing new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH batteries that have been in storage can drop below 3.0V across the pack. Some Code A Phone bases read that as an error condition and refuse to initiate a charge cycle. Remove the handset, wait 10 seconds, then reseat it firmly — the base re-polls the pack voltage on contact. If the error light persists, the pack voltage may need a brief boost: place the handset in the base, press and hold the talk key for five seconds, then release. This nudges the base into a recovery charge at reduced current.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340110725210,"sku":"BWCS-P302CL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340110757978,"sku":"BWCS-P302CL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340110790746,"sku":"BWCS-P302CL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P302CL_1.webp?v=1778367188","url":"https:\/\/batteryweb.com\/products\/code-a-phone-3150-replacement-battery-36v-600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}