{"product_id":"collomix-xo-10-nc-replacement-battery-18v-2000mah-li-ion","title":"Collomix 18V Li-ion Replacement Battery XO 10 NC 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCollomix Xo 10 NC — 18V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V Li-ion battery rated at 2000mAh (36Wh), built to replace the original pack in the Collomix Xo 10 NC cordless mixer and PRO HT Winkelschleifer. The Xo 10 NC is a construction-grade mortar and material mixer used for blending concrete, plaster, tile adhesive, and similar compounds. Voltage and cell count match the original pack exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXo 10 NC and PRO HT Winkelschleifer compatibility:\u003c\/strong\u003e\n    Both tools run on the same 18V rail and share the same connector format and BMS handshake protocol. Swapping batteries between these two tools is standard practice on Collomix platforms — this pack supports both without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge sequences, monitoring BMS response during motor-start inrush events. The overcurrent protection triggered correctly at high-draw spikes and reset without manual intervention after load was removed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use load conditioning on a mixer:\u003c\/strong\u003e\n    On first use, run the mixer at half load for two cycles before tackling full-batch concrete or tile adhesive. This lets the BMS profile the motor's inrush current draw and calibrate its overcurrent thresholds before sustained heavy mixing sessions.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on motor-start inrush during thick-batch mixing\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the Xo 10 NC starts under a heavy load — dense mortar, thick adhesive, or a partially set batch — the motor draws a large inrush current spike in the first fraction of a second. If the BMS reads that spike above its overcurrent threshold, it trips and cuts power immediately. This is not a battery fault; it is the protection circuit doing its job. Remove the paddle, clear the batch resistance, then restart the mixer unloaded before re-engaging the material.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising this pack after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion packs that have sat unused for several months can drop below the charger's acceptance voltage — typically under 2.5V per cell. When this happens, the charger blinks an error or does nothing at all. Most Collomix-compatible chargers have a recovery or trickle mode; consult the charger manual and activate it if available. If no recovery mode exists, a compatible charger with a manual boost function can bring the pack back up to 3.0V per cell, at which point normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416016519258,"sku":"BWCS-MTB180VX-1","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416016552026,"sku":"BWCS-MTB180VX-2","price":92.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416016584794,"sku":"BWCS-MTB180VX-3","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTB180VX-1.webp?v=1779759486","url":"https:\/\/batteryweb.com\/products\/collomix-xo-10-nc-replacement-battery-18v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}