{"product_id":"comen-nd10-monitor-replacement-battery-108v-2500mah-li-ion","title":"COMEN ND10 Monitor Replacement Battery 10.8V 2500mAh CMLI1X3N004A","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCOMEN ND10 Monitor Series — 10.8V Li-ion Replacement Battery (CMLI1X3N004A)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 2500mAh Li-ion battery built to the CMLI1X3N004A specification. It fits the COMEN ND10, ND10A, ND10C, and ND10S patient monitors, along with additional variants in the ND10 series. These monitors run continuous vital signs surveillance — heart rate, SpO2, NIBP, and temperature — so consistent, uninterrupted power is critical.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eND10 series platform compatibility:\u003c\/strong\u003e\n    All ND10 variants share the same voltage rail, physical connector, and BMS handshake protocol, which is why a single cell chemistry at 10.8V covers the full model range without firmware or hardware modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery through the ND10's power-on self-test sequence and confirmed the BMS communicates state-of-charge correctly to the monitor's charge IC. The cell passed capacity verification within the device's accepted threshold window.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the ND10 to complete its full power-on self-test without interruption. The monitor's BMS verification routine runs at startup — cutting power during this sequence triggers a persistent battery fault flag that won't clear until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the ND10 shows a battery fault after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe ND10 monitor uses a BMS threshold calibrated to the original cell's chemistry profile. A fresh replacement cell hasn't yet built a charge history for the device to reference, so the monitor's charge IC applies a conservative acceptance window on the first cycle. This can flag an alert even when the cell is genuinely full. One complete charge-to-discharge-to-charge cycle lets the BMS establish a baseline and clears the mismatch. Do not place the device in clinical rotation until this cycle is complete.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eND10 not completing boot sequence on new battery after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the cell voltage drops below approximately 9.0V, the ND10's BMS will refuse to initiate a boot sequence — the device appears dead even when connected to a charger. In this state, leave the battery connected to the dock or charger for at least 60 minutes before attempting to power on. The charge IC needs to bring the cell above the BMS recovery threshold before it will pass control to the monitor's startup sequence. If the device still won't boot after that window, check that charger output voltage is stable at the rated level before assuming a faulty cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381356462170,"sku":"BWCS-CND100MD-1","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381356494938,"sku":"BWCS-CND100MD-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381356527706,"sku":"BWCS-CND100MD-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CND100MD-1.webp?v=1778900174","url":"https:\/\/batteryweb.com\/products\/comen-nd10-monitor-replacement-battery-108v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}