{"product_id":"covidien-kangaroo-epump-replacement-battery-48v-3600mah-ni-mh","title":"Covidien Kangaroo ePump F010484WT Replacement Battery 4.8V 3600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCovidien Kangaroo ePump — 4.8V Ni-MH Replacement Battery (F010484WT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 4.8V, 3600mAh Ni-MH battery for the Covidien Kangaroo ePump enteral feeding pump. It fits both the standard Kangaroo ePump and Kangaroo ePump Enteral Feeding Pump variants. It replaces OEM part numbers F010484WT, 6094, and 1054715.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKangaroo ePump compatibility:\u003c\/strong\u003e\n    Both pump variants share the same 4.8V power rail, connector footprint, and BMS handshake protocol. The cell count and voltage match the OEM spec exactly, so the pump's control board recognises the battery without throwing a fault code on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the Kangaroo ePump platform. The BMS completed its verification pass without cutoff, and the pump's motor draw stayed within the cell's continuous discharge rating across the full test sequence.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test protocol:\u003c\/strong\u003e\n    After installing this battery, let the pump complete its full power-on self-test cycle without interruption. The Kangaroo ePump runs a BMS verification sequence at boot — cutting power during this window triggers a false battery fault flag that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Kangaroo ePump alarms low battery on a freshly charged replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe pump's charge IC sets a conservative acceptance threshold calibrated to a conditioned OEM cell. A new Ni-MH cell has not yet stabilised its internal resistance, so the BMS reads voltage recovery curves as below threshold and triggers the alarm. This clears after one complete charge-discharge cycle, which allows the BMS to map the cell's actual capacity profile. Do not use the pump clinically until that first full cycle is complete.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eKangaroo ePump not powering on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day at room temperature. A cell stored for several months can drop below the pump's BMS recovery threshold, typically around 4.0V for a 4.8V four-cell pack, at which point the BMS blocks startup to protect the cells. Connect the battery to the pump's charger and leave it for a full charge cycle before attempting to power on. If the charge indicator does not respond within 30 minutes, check that the charger output is reaching at least 5.5V at the connector.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381458108506,"sku":"BWCS-CKP715MD-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381458141274,"sku":"BWCS-CKP715MD-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381458174042,"sku":"BWCS-CKP715MD-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CKP715MD-1.webp?v=1778900983","url":"https:\/\/batteryweb.com\/products\/covidien-kangaroo-epump-replacement-battery-48v-3600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}