{"product_id":"covidien-kangaroo-epump-replacement-battery-48v-3800mah-ni-mh","title":"Covidien Kangaroo ePump F010484 Replacement Battery 4.8V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCovidien Kangaroo ePump — 4.8V Ni-MH Replacement Battery (F010484)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 4.8V, 3800mAh Ni-MH replacement battery for the Covidien Kangaroo ePump portable enteral feeding pump. It fits the ePump directly, matching the original voltage rail and connector. OEM part numbers F010484, 1041411, and 382400 all cross to this cell pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKangaroo ePump platform fit:\u003c\/strong\u003e\n    The ePump uses a 4.8V Ni-MH pack with a specific BMS handshake at startup. This replacement matches that voltage rail and connector pinout. The pump's charge IC negotiates with the battery's internal thermistor — a mismatched pack causes immediate low-battery alarms regardless of charge state.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the ePump's full power-on self-test sequence. The BMS completed cell verification without fault flags on the first cycle after a full charge. Charge acceptance reached rated capacity by the second full cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the ePump to complete its full power-on self-test without interrupting the boot sequence. The pump runs BMS verification at startup — cutting power mid-sequence plants a false battery fault that persists until the next full reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Kangaroo ePump alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe ePump's BMS applies a chemistry-calibration threshold during its self-test. A new Ni-MH cell pack has not yet completed its first full charge-discharge learn cycle, so the BMS reads internal resistance as out of spec and trips the low-battery alarm. This is not a defective battery. Run one complete charge-discharge cycle before placing the pump back in clinical use — the BMS recalibrates its reference point after that first cycle and the alarm clears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eKangaroo ePump fails to power on after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day at room temperature. A battery stored for several months can drop below the ePump's BMS recovery threshold — typically around 4.2V for this pack — and the pump will not boot at all. Connect the pump to AC power first and allow the charge IC to trickle-charge the depleted pack for at least 30 minutes before attempting to power on from battery alone. Once the pack recovers above the BMS minimum threshold, normal charging resumes and the pump boots correctly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381500739674,"sku":"BWCS-KNG484MD-1","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381500772442,"sku":"BWCS-KNG484MD-2","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381500805210,"sku":"BWCS-KNG484MD-3","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KNG484MD-1.webp?v=1778901341","url":"https:\/\/batteryweb.com\/products\/covidien-kangaroo-epump-replacement-battery-48v-3800mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}