{"product_id":"covidien-kendall-scd-700-replacement-battery-108v-2600mah-li-ion","title":"Covidien Kendall SCD 700 Replacement Battery 10.8V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCovidien Kendall SCD 700 — 10.8V Li-ion Replacement Battery (1030950)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 2600mAh Li-ion battery for the Covidien Kendall SCD 700 sequential compression device. The SCD 700 is used for intermittent pneumatic compression therapy to prevent deep vein thrombosis in clinical and home settings. This cell replaces OEM part number 1030950 directly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSCD 700 platform fit:\u003c\/strong\u003e\n    The Kendall SCD 700 uses a dedicated 10.8V three-cell lithium-ion pack with a BMS that handshakes with the device charge controller at startup. Voltage and connector geometry must match exactly — the SCD 700 will reject packs outside its accepted voltage window during the power-on self-test.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through a full charge and load discharge on the SCD 700 platform. The BMS completed its verification sequence without fault, and the charge controller reached termination voltage correctly on the first cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the SCD 700 to complete its full power-on self-test without interruption. The device runs a BMS verification routine at every boot. Cutting power during that sequence causes a false battery fault flag that persists until the next clean reboot from full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SCD 700 rejects a new battery during self-test\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe SCD 700 BMS compares the new cell's impedance and open-circuit voltage against thresholds set for a conditioned OEM pack. A fresh cell often reads slightly outside those windows on the first boot. The device may log a battery fault or refuse to enter therapy mode. One complete charge-discharge cycle lowers internal impedance enough for the BMS to pass the cell on subsequent self-tests.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator stalls below 100% on first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn a new cell, the SCD 700 charge IC applies a conservative current limit until it characterises the pack. This causes the on-screen charge indicator to stall — typically between 85% and 95% — for an extended period before jumping to full. The cell is still charging; the display is waiting for the IC to confirm the pack has met its termination criteria. Leave the device plugged in until the indicator reaches 100% and the charge LED changes state before disconnecting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381431271514,"sku":"BWCS-CKD700MD-1","price":61.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381431304282,"sku":"BWCS-CKD700MD-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381431337050,"sku":"BWCS-CKD700MD-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CKD700MD-1.webp?v=1778900749","url":"https:\/\/batteryweb.com\/products\/covidien-kendall-scd-700-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}