{"product_id":"cowon-iaudio-m3-replacement-battery-37v-1100mah-li-ion","title":"Cowon iAUDIO M3 Replacement Battery 3.7V 1100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCowon iAUDIO M3 \/ X5 — 3.7V Li-ion Replacement Battery (PPCW0401)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1100mAh Li-ion battery replaces the original cell in the Cowon iAUDIO M3 and X5 portable media players. It matches the OEM dimensions of 50.00 × 34.30 × 5.50mm, so it seats correctly in the battery bay without modification. Swap it in when the original cell no longer holds charge or fails to power the device at all.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eiAUDIO M3 and X5 compatibility:\u003c\/strong\u003e\n    Both the M3 and X5 share the same battery bay geometry, connector pinout, and 3.7V nominal voltage rail — that is why one cell covers both models. The BMS on each player reads the same charge termination voltage, so no firmware differences affect charging behaviour.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the cell through full charge and discharge cycles on the iAUDIO platform. The BMS accepted charge current without flagging faults, and low-voltage cutoff triggered cleanly at the expected threshold before any cell damage could occur.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap initialisation for iAUDIO players:\u003c\/strong\u003e\n    After fitting a new cell, connect the M3 or X5 to its charger before attempting to power on. A fresh or stored cell may sit below the player's minimum startup voltage, and the device will appear dead until the charger delivers a trickle current for 20–30 minutes to bring the cell above that threshold.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping after a cell swap on the iAUDIO M3\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe M3 uses a voltage-threshold fuel gauge — it estimates remaining charge by reading cell voltage, not by tracking actual coulombs. After a fresh cell is installed, the player has no reference history for the new cell's discharge curve, so the indicator jumps between readings as the BMS recalibrates. Run two or three full charge-to-discharge cycles and the percentage display will stabilise. Do not pull the battery mid-cycle during this period or the calibration resets.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePlayback cutting out before the battery indicator shows empty\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNear the end of a discharge cycle, cell voltage sags under the load of the audio amplifier. The M3's amplifier draws enough current that voltage briefly drops below the BMS protection threshold — triggering a cutoff — even though the gauge still shows remaining charge. This is a load-dependent cutoff, not a faulty cell. It becomes more pronounced if the volume is high or if a high-impedance headphone is connected, both of which increase amplifier draw. Reduce output load or recharge the cell when cutouts begin; do not attempt to reset the BMS by short-cycling the power button.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381340209242,"sku":"BWCS-SFM3SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381340242010,"sku":"BWCS-SFM3SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381340274778,"sku":"BWCS-SFM3SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SFM3SL-1.webp?v=1778900029","url":"https:\/\/batteryweb.com\/products\/cowon-iaudio-m3-replacement-battery-37v-1100mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}