{"product_id":"creative-vado-hd-replacement-battery-37v-1050mah-li-ion","title":"Creative Vado HD 3.7V 1050mAh Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCreative Vado HD — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 1050mAh Li-ion battery for the Creative Vado HD pocket camcorder. It replaces the original cell when charge capacity has dropped and recording sessions are cutting short. Dimensions are 52.96 x 35.63 x 7.00mm — confirm these against your existing battery before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVado HD compatibility:\u003c\/strong\u003e\n    The Vado HD uses a single-cell 3.7V Li-ion pack with a compact form factor that fits the flush-mount battery bay. Voltage and physical dimensions must both match — a cell that is even 1mm too thick will prevent the battery door from closing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the Vado HD platform. The BMS accepted a standard 5V USB charge input without fault flags, and voltage hold was stable across the discharge curve until the low-battery cutoff triggered cleanly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eLi-ion activation after extended storage:\u003c\/strong\u003e\n    If the Vado HD arrives depleted or has been sitting unused, connect the charger before attempting to power on. Cells stored below 3.0V may enter a deep discharge protection state where the device will not respond to the power button until a trickle charge has raised cell voltage above the BMS recovery threshold.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping after fitting a new cell in the Vado HD\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Vado HD uses a voltage-threshold fuel gauge — it reads remaining charge by measuring cell voltage, not by tracking charge history. A fresh cell has no charge history stored, so the indicator recalibrates in real time as voltage settles. You may see the percentage jump by 10–20% in the first few cycles. Run two full charge-to-discharge cycles and the reading will stabilise at the correct voltage-to-percentage mapping.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePlayback cutting out before the battery indicator shows empty\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Vado HD's video output and sensor circuits draw more current during active recording than during standby. At the end of a discharge curve, cell voltage sags under that load faster than the fuel gauge can track. The device shuts down to protect the cell even though the indicator still shows a remaining charge. This is a load-sag cutoff, not a faulty battery. Charge the cell back to 4.2V and the full usable capacity will be available again.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381349417050,"sku":"BWCS-CRT202SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381349449818,"sku":"BWCS-CRT202SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381349482586,"sku":"BWCS-CRT202SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CRT202SL-1.webp?v=1778900059","url":"https:\/\/batteryweb.com\/products\/creative-vado-hd-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}