{"product_id":"critikon-p81-replacement-battery-48v-800mah-ni-cd","title":"Critikon P81 Patient Monitor Compatible Battery 4.8V 800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCritikon P81 — 4.8V Ni-CD Replacement Battery (08.13.005.02)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 4.8V 800mAh nickel-cadmium battery for the Critikon P81 non-invasive blood pressure monitor. It replaces OEM part 08.13.005.02 and restores portable operation when the original cell has degraded or failed. Voltage and chemistry match the P81's onboard charge circuit exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eP81 monitor fit:\u003c\/strong\u003e\n    The P81 uses a 4.8V Ni-CD pack because its charge IC is calibrated for NiCd voltage curves and termination behaviour. Substituting a different chemistry causes the charge IC to misread cell state, resulting in incomplete charges or false full-charge flags. This cell matches the required voltage rail and charge termination profile.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through the P81's charge circuit and confirmed the BMS accepted the cell without fault flags. The charge IC reached delta-V termination cleanly and the monitor completed its power-on self-test without interruption.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use cycle on clinical equipment:\u003c\/strong\u003e\n    After installing this cell, let the P81 complete one uninterrupted full charge before clinical use. Medical device BMS firmware applies a conservative initial charge limit on new cells — a single complete charge-discharge cycle allows the BMS to calibrate its capacity register and pass the internal self-test threshold reliably.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eP81 alarming low battery immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe P81's BMS stores a capacity threshold from the previous cell and compares it against the new cell's first reported state-of-charge. A freshly installed Ni-CD cell has not yet completed a calibration cycle, so the BMS reads its charge register as below threshold and triggers the low battery alarm even when the cell is fully charged. This is not a fault with the replacement cell. Run one complete charge-discharge cycle without interrupting the monitor mid-cycle, and the BMS will recalibrate its threshold to match the new cell. After that cycle the alarm clears and does not return under normal use.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eP81 will not power on after the battery sat unused in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-CD cells self-discharge at roughly 1–2% per day at room temperature. A cell stored in a device for several months can drop below 1.0V per cell — the level at which the P81's BMS locks out power-on to protect the monitor's circuitry from an undervoltage event. Placing the monitor on charge does not always recover the cell immediately because the BMS may refuse to initiate a charge cycle until the pack voltage rises above its recovery floor. Connect the charger and leave it undisturbed for at least 30 minutes — the charge IC applies a low-current trickle to bring the pack above the recovery threshold, after which normal charging resumes and the monitor powers on.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381373763674,"sku":"BWCS-CKP810MD-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381373796442,"sku":"BWCS-CKP810MD-2","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381373829210,"sku":"BWCS-CKP810MD-3","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CKP810MD-1.webp?v=1778900351","url":"https:\/\/batteryweb.com\/products\/critikon-p81-replacement-battery-48v-800mah-ni-cd","provider":"BatteryWeb","version":"1.0","type":"link"}