{"product_id":"critikon-systems-dinamap-plus-8710-replacement-battery-12v-1800mah-ni-mh","title":"Critikon EPP-100C Dinamap Plus 12V Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCritikon Systems Dinamap Plus 8710\/8720\/8725 — 12V Ni-MH Replacement Battery (EPP-100C)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 1800mAh Ni-MH replacement battery for the Critikon Systems Dinamap Plus 8710, 8720, and 8725 non-invasive blood pressure monitors. It carries OEM part number EPP-100C and slots into the same bay as the original cell. Voltage and capacity match the factory specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDinamap Plus 8710, 8720, and 8725 compatibility:\u003c\/strong\u003e\n    All three models share the same 12V battery bay, connector pinout, and charge management circuit. One cell fits all three units without modification or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Dinamap Plus charge and discharge sequence. The BMS accepted the cell on first insertion, held charge correctly, and the low-battery alert triggered at the expected voltage threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eClinical unit power-down handling:\u003c\/strong\u003e\n    If the monitor will sit unused for more than two weeks — common between ward rotations — remove the battery from the bay. Ni-MH cells left at partial charge inside medical equipment can trigger false low-battery warnings after extended standby due to self-discharge characteristics of the chemistry.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Dinamap Plus BMS rejects a new cell on first install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Dinamap Plus charge circuit checks cell voltage on insertion before initiating a charge cycle. A new Ni-MH cell shipped in storage mode may sit below the monitor's minimum acceptance threshold — typically around 10V for a 12V Ni-MH pack. When this happens, the monitor either shows no battery indicator or fails to power on from battery alone. Connect the unit to mains power first and allow a full supervised charge cycle to complete. Once the cell reaches a voltage the BMS recognises, the monitor will operate normally on battery power.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMonitor shows battery present but drops to low-battery warning faster than expected\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells have a flatter discharge curve than Li-ion, and the Dinamap Plus indicator is calibrated to that curve. A new cell that hasn't completed its first full charge cycle will show a compressed voltage range, making the monitor's gauge read low earlier than the actual charge state warrants. Run two to three full charge-discharge cycles on mains power before relying on the battery indicator for clinical decisions. After conditioning, the low-battery threshold should align at approximately 10.8V under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333817204826,"sku":"BWCS-VBF2E-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333817237594,"sku":"BWCS-VBF2E-2","price":93.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333817270362,"sku":"BWCS-VBF2E-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VBF2E_1.webp?v=1778213259","url":"https:\/\/batteryweb.com\/products\/critikon-systems-dinamap-plus-8710-replacement-battery-12v-1800mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}