{"product_id":"cyberbank-poz-g300-replacement-battery-37v-1100mah-li-ion","title":"CyberBank POZ G300 Replacement Battery GALA160 3.7V 1100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCyberBank POZ G300 — 3.7V Li-ion Replacement Battery (GALA160)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1100mAh Li-ion replacement battery for the CyberBank POZ G300 PDA. It fits directly in place of the original GALA160 cell. Use it to restore full power to a device that no longer holds a charge or fails to turn on.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePOZ G300 fitment:\u003c\/strong\u003e\n    The G300 uses a single-cell 3.7V Li-ion pack with the GALA160 part number. The connector pinout and BMS communication protocol match the original, so the host device recognises the battery and reports charge state correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through charge and discharge on the G300 platform. The BMS engaged protection cutoff at the correct low-voltage threshold and accepted a full charge without triggering fault flags on the device.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eRAM retention before swap:\u003c\/strong\u003e\n    The POZ G300 stores open application state and unsaved data in volatile RAM powered directly by the main battery. Sync all data to a host computer before removing the old battery — anything not written to flash storage will be lost the moment the cell loses contact.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the POZ G300 won't boot after a new battery is installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe G300 boot sequence requires a minimum voltage before the processor initialises. A brand-new replacement cell ships at a partial state of charge — sometimes as low as 3.0V — which can sit below the device's boot threshold. The device appears dead, but the battery is functional. Connect the G300 to its charger for at least 30 minutes before attempting the first power-on. If the device still won't boot at that point, verify the battery contact pins are seated and the voltage reads above 3.4V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWireless sync dropping or stalling after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe G300's wireless radio draws a spike of current when it transmits, and this temporarily pulls the battery voltage down. If the battery is not at full charge, that sag can cross the radio's minimum operating voltage and cause the connection to drop mid-sync. This looks like a software or driver problem but is a power delivery issue. Charge the battery to 4.2V before running a wireless sync session to keep the voltage rail stable throughout the transfer.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415950491738,"sku":"BWCS-P100SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415950524506,"sku":"BWCS-P100SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415950557274,"sku":"BWCS-P100SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P100SL-1.webp?v=1779758425","url":"https:\/\/batteryweb.com\/products\/cyberbank-poz-g300-replacement-battery-37v-1100mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}