{"product_id":"datalogic-cvr2-replacement-battery-37v-1000mah-li-ion","title":"64ACC1368 Datalogic CVR2 Replacement Battery 3.7V 1000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDatalogic CVR2 \/ Memor Series — 3.7V Li-ion Replacement Battery (64ACC1368)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1000mAh Li-ion battery replaces part numbers 64ACC1368, 94ACC1367, and 94ACC1368 in the Datalogic CVR2, DL-Memor, and Memor handheld barcode scanners. These scanners are common in retail, warehouse, and logistics pick-and-pack operations where daily battery cycling is heavy. Dimensions are 64.70 × 37.00 × 7.40mm — a direct match to the original cell footprint.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCVR2, DL-Memor, and Memor compatibility:\u003c\/strong\u003e\n    All three models share the same battery bay geometry, contact arrangement, and BMS communication protocol. One cell fits all three without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the CVR2 platform. The BMS handshake completed cleanly, cell voltage held steady through repeated scan-trigger inrush events, and charging communication with the cradle registered correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation for pick-and-pack use:\u003c\/strong\u003e\n    After installing a fresh pack, place the scanner in its cradle and run a full charge cycle before using it on the floor. Scan-trigger inrush current is highest when the cell is near minimum charge, and starting below threshold can cause the BMS to trip on the first active shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen a new battery shows a charging fault on the cradle, the most common cause is contact resistance at the battery terminals — not a faulty cell or dock. Oils, dust, and residue from handling transfer onto the gold contacts during installation. Wipe the battery contact strip with a dry, lint-free cloth, reseat the scanner firmly in the cradle, and confirm the charge indicator activates. If the error clears, the pack was fine; the contacts just needed cleaning before the dock could read pack voltage.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner dropping wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CVR2 and Memor draw current simultaneously from the wireless radio and the scan trigger during fast barcode reads. On a degraded or low cell, this combined inrush can pull voltage below the BMS protection threshold, causing the radio to drop momentarily and the scanner to lose its access point connection. A fresh, fully charged pack raises the voltage floor and keeps both loads stable through burst scanning. If dropouts persist with a charged pack, check that the cradle contact pins are clean and seating fully — a poor contact raises effective resistance and amplifies the sag.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324923904090,"sku":"BWCS-DAV200BL-1","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324923936858,"sku":"BWCS-DAV200BL-2","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324923969626,"sku":"BWCS-DAV200BL-3","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DAV200BL-1.webp?v=1778123426","url":"https:\/\/batteryweb.com\/products\/datalogic-cvr2-replacement-battery-37v-1000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}