{"product_id":"datalogic-falcon-x3-replacement-battery-37v-6800mah-li-ion","title":"Datalogic Falcon X3 Replacement Battery 94ACC1386 3.7V 6800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDatalogic Falcon X3 \/ X3+ \/ X4 — 3.7V Li-ion Replacement Battery (94ACC1386)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 6800mAh (25.16Wh) Li-ion battery replaces the original pack in the Datalogic Falcon X3, Falcon X3+, and Falcon X4 handheld mobile computers. These scanners are used across warehouse picking, retail stocktaking, and logistics operations where shifts run long and downtime is not an option. The OEM part numbers covered are 94ACC1386, BT-26, 4ACC0046, and BT-0016.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFalcon X3, X3+, and X4 platform fit:\u003c\/strong\u003e\n    All three models share the same battery bay geometry, contact pin layout, and BMS handshake protocol. The same cell and protection circuit works across the series without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through a full charge cycle on a Falcon X3 cradle and monitored BMS communication across the scanner's charge controller. The protection circuit responded correctly to charge termination and low-voltage cutoff without error flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation for pick-and-pack use:\u003c\/strong\u003e\n    After installing, place the scanner in its cradle for a full charge cycle before beginning a pick-and-pack shift. Scan trigger inrush current peaks when the cell is near minimum charge, and a fully charged pack prevents false BMS trips during the first burst of scanning.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Falcon X3 cradle uses spring-loaded gold contacts to communicate charge status between the dock and the battery. If those contacts carry oxidation or warehouse dust, the dock's charge controller reads an incomplete circuit and raises an error rather than starting the charge cycle. This is not a fault in the battery — it is a contact resistance issue. Wipe the four contacts on the base of the battery and the matching pins in the cradle with a dry cloth, then reseat the unit firmly. The charge indicator should switch to active within ten seconds of reseating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during a rapid scan burst\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Falcon X3 draws simultaneously from the wireless radio and the scan trigger during a fast barcode burst. If the battery voltage sags below the radio module's minimum operating threshold during that combined draw, the Wi-Fi or Bluetooth stack drops its connection before the scan is logged. This happens most often late in a shift when the cell is below 30% charge. The fix is to swap the battery before the shift reaches that point — check the charge indicator on the device display and rotate packs when two bars remain.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324827861082,"sku":"BWCS-DAX300BH-1","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324827893850,"sku":"BWCS-DAX300BH-2","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324827926618,"sku":"BWCS-DAX300BH-3","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DAX300BH-1.webp?v=1778123165","url":"https:\/\/batteryweb.com\/products\/datalogic-falcon-x3-replacement-battery-37v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}