{"product_id":"deatti-bm101-m-replacement-battery-37v-3000mah-li-polymer","title":"Deatti BM101-M Replacement Battery 3.7V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDeatti BM101-M — 3.7V Li-Polymer Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 3000mAh Li-Polymer battery replaces the original cell in the Deatti BM101-M baby monitor parent unit. It measures 64.00 × 49.80 × 6.50mm and matches the original connector and BMS handshake. Capacity figure is taken directly from product data at 11.1Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBM101-M parent unit fit:\u003c\/strong\u003e\n    The BM101-M parent unit runs its display, speaker, and 2.4GHz radio module from a single Li-Polymer cell at 3.7V nominal. This cell matches that voltage rail and the physical footprint of the factory unit — no adapter or modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the BM101-M parent unit. The BMS accepted the cell without fault flags, and the protection circuit tripped correctly at low-voltage cutoff before the unit could deep-discharge the pack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eWireless link after battery swap:\u003c\/strong\u003e\n    After fitting this cell, re-pair the parent unit with the camera unit. The BM101-M loses its stored pairing when the parent unit drops to zero volts — the radio module resets and needs to re-establish the link from scratch.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eParent unit battery draining overnight during normal use\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eRunning the BM101-M parent unit through the night with the screen on is a sustained draw — the LCD backlight, speaker circuit, and 2.4GHz radio all pull from the same 3000mAh cell continuously. A degraded original cell collapses under this load well before morning. This replacement cell restores full capacity, but screen timeout is still worth enabling. Setting the display to auto-off after 30–60 seconds significantly reduces overnight draw while keeping audio and alerts active.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eNight vision not working after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe camera unit's IR LED array requires a stable voltage from its own power source, but the parent unit's radio signal must be strong and stable for the night vision feed to transmit cleanly. If the parent unit battery is below roughly 3.5V, the radio output drops and the IR video stream breaks up or disappears entirely. Charge the parent unit fully after fitting this replacement — 4.2V at full charge — before testing night vision. Once the cell reaches full charge, the video feed stabilises and IR frames transmit without dropout.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43315057360986,"sku":"BWCS-BYT200SL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43315057393754,"sku":"BWCS-BYT200SL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43315057426522,"sku":"BWCS-BYT200SL-3","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BYT200SL-1.webp?v=1777949547","url":"https:\/\/batteryweb.com\/products\/deatti-bm101-m-replacement-battery-37v-3000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}