{"product_id":"deebot-x8-pro-omn-replacement-battery-144v-6700mah-li-ion","title":"DEEBOT X8 Pro OMN Compatible Battery 14.4V 6700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDEEBOT X8 Pro OMN — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 6700mAh Li-ion replacement battery for the DEEBOT X8 Pro OMN robotic vacuum cleaner. It slots into the X8 Pro OMN chassis and restores power to the suction motor, brush roll, and navigation systems. Capacity is sourced from product data at 96.48Wh — not estimated from third-party listings.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX8 Pro OMN platform fit:\u003c\/strong\u003e\n    The X8 Pro OMN runs a 14.4V motor rail shared across its suction and drive systems. This cell matches that rail voltage and the physical form factor — 136.70 x 50.50 x 37.20mm — so the pack seats correctly in the battery bay without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the X8 Pro OMN platform. The BMS communicated correctly with the dock charger, accepted a full charge cycle, and released current to the motor without triggering a protection cutoff under normal suction load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on the X8 Pro OMN:\u003c\/strong\u003e\n    Do not leave the X8 Pro OMN sitting on the dock between every clean. Continuous dock contact keeps the battery in a trickle-charge state that accelerates capacity fade. Charge to full, then lift the unit off the dock until the next cleaning session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator shows low on the X8 Pro OMN\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe X8 Pro OMN's suction motor draws significantly more current under a blocked filter or restricted airflow path. When draw spikes beyond the BMS current threshold, the pack sags in voltage even though the state-of-charge reading still looks normal. The motor gets less voltage than it needs, and suction force falls noticeably. Before swapping the battery, check the filter and brush roll for blockage — a clean airway drops motor draw back into the rated range and eliminates the sag.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the suction path is partially restricted, the motor sustains a high-draw state long enough for the BMS to read it as a fault and cut output. The pack resets after a brief cool-down, which is why the unit restarts. Clean the filter thoroughly — if the cutout stops after that, the cell is not the fault. If cutouts continue with a clean filter on a new battery, check that the charger completed a full cycle and the pack voltage is sitting at or above 16.4V after charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426415706202,"sku":"BWCS-EDT310VX-1","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426415738970,"sku":"BWCS-EDT310VX-2","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426415771738,"sku":"BWCS-EDT310VX-3","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDT310VX-1.webp?v=1779933222","url":"https:\/\/batteryweb.com\/products\/deebot-x8-pro-omn-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}