{"product_id":"deity-spd-1-replacement-battery-144v-6400mah-li-ion","title":"Deity SPD-1 Replacement Battery 14.4V 6400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDeity SPD-1 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V 6400mAh (92.16Wh) Li-ion battery replaces the original pack in the Deity SPD-1 portable field recorder. It fits the SPD-1's battery bay directly and matches the original voltage rail. Use it for broadcast, documentary, and field audio\/video production sessions where extended off-grid operation is required.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPD-1 platform fit:\u003c\/strong\u003e\n    The SPD-1 draws a stable 14.4V supply to power its recording engine and internal storage. This pack matches that voltage rail and uses the same cell configuration, so the BMS handshake completes on boot without triggering a battery-fault flag.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack under sustained recording loads and monitored BMS behaviour through power-on, active logging, and USB data transfer. The BMS held within spec across all three load states without an unexpected cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration on the SPD-1:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the SPD-1's instrument menu before your first field session. The device maps battery state during calibration, and skipping this step causes premature low-battery warnings early in the first recording session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the SPD-1 initialises its recording modules on start-up\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the SPD-1 powers on, its internal recording and storage modules draw a brief current spike as they initialise. If the battery's BMS has a low inrush threshold — common in aged or deeply discharged packs — it interprets that spike as a fault and cuts the output before the device fully boots. This replacement pack uses cells with a BMS inrush rating matched to the SPD-1's start-up draw profile. If the unit still cuts out on first boot, charge the pack to full before retrying — a partially charged Li-ion cell has higher internal resistance and amplifies the voltage sag during that spike.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSPD-1 shuts down during active logging with no low-battery warning\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when sustained sensor or storage load pulls the pack's output voltage below the device's brownout threshold, even though the battery still holds significant charge. The SPD-1 doesn't always show a low-battery alert before this kind of brownout — it simply stops. The cause is usually voltage sag under load, not total depletion. Charge the replacement pack fully before the session and confirm resting voltage reads at or above 16.4V off the charger before inserting it into the unit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360689946714,"sku":"BWCS-EFT200SL-1","price":281.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360689979482,"sku":"BWCS-EFT200SL-2","price":335.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360690012250,"sku":"BWCS-EFT200SL-3","price":376.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EFT200SL-1.webp?v=1778616161","url":"https:\/\/batteryweb.com\/products\/deity-spd-1-replacement-battery-144v-6400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}