{"product_id":"dell-precision-14-5470-replacement-battery-154v-4400mah-li-polymer","title":"Dell Precision 14 5470 Replacement Battery 15.4V 4400mAh CDTT2","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDell Precision 14 5470 — 15.4V Li-Polymer Replacement Battery (CDTT2)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 15.4V 4400mAh (67.76Wh) lithium-polymer battery is a direct replacement for the Dell Precision 14 5470 mobile workstation. It fits both the Precision 14 5470 and Precision 5470 — same chassis, same connector, same BMS protocol. OEM part numbers CDTT2 and P83V9 both cross to this cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision 14 5470 and 5470 platform fit:\u003c\/strong\u003e\n    Both Precision 5470 variants share the same 15.4V power rail, physical connector, and Dell EC handshake protocol. One cell covers both. No adapter or firmware workaround needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell in a Precision 5470 chassis and logged the BMS handshake. The EC recognised the cell within 30 seconds of boot, reported correct voltage, and accepted a full charge cycle without fault codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBIOS learn cycle after install:\u003c\/strong\u003e\n    After fitting this cell, run the laptop down to hibernate cutoff on battery power alone, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell's actual capacity and clears the spurious health warning that appears after every cell swap on Precision hardware.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Precision 5470 BIOS reports poor battery health after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Precision 5470 stores battery wear data in EEPROM on the old cell. When you swap the cell, the BIOS reads zero charge cycles and flags a health mismatch against its expected profile. This is not a fault with the new cell — it is stale EEPROM data from the previous battery being absent. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% prompts the BIOS to write a new baseline. After two to three cycles the health status normalises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shuts down at 20–30% remaining after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC is still calibrated to the discharge curve of the old, degraded cell. Under full CPU and display load the new cell's voltage curve sits higher than the IC expects, so the reported percentage jumps and then drops sharply when the load increases. The system hits a voltage floor it wasn't anticipating and shuts down before the gauge reaches 0%. Run two full discharge cycles — power down to hibernate cutoff each time — and the fuel gauge IC will recalibrate its voltage-to-percentage mapping to match the new cell. After calibration, shutdowns at 20–30% stop.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409530323034,"sku":"BWCS-DEP547NB-1","price":88.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409530355802,"sku":"BWCS-DEP547NB-2","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409530388570,"sku":"BWCS-DEP547NB-3","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEP547NB-1.webp?v=1779579904","url":"https:\/\/batteryweb.com\/products\/dell-precision-14-5470-replacement-battery-154v-4400mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}