{"product_id":"denso-gt10b-replacement-battery-24v-1500mah-ni-mh","title":"Denso GT10B Barcode Scanner Replacement Battery 2.4V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDenso GT10B \/ DS26H2-D — 2.4V Ni-MH Replacement Battery (SB10N)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 1500mAh Ni-MH replacement battery for the Denso GT10B and DS26H2-D handheld barcode scanners. Both models use the SB10N pack with the same connector orientation and BMS handshake. Capacity is sourced from product specification — 3.6Wh total energy.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGT10B and DS26H2-D shared platform:\u003c\/strong\u003e\n    These two Denso scanners run the same 2.4V power rail, use an identical battery bay, and expect the same BMS communication protocol. One replacement pack covers both units — no modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the SB10N through charge and discharge cycles on compatible Denso hardware. The BMS completed full charge acceptance without tripping fault flags, and the pack held rated voltage through scan-burst load events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation for pick-and-pack:\u003c\/strong\u003e\n    Before the first shift, seat the scanner in its cradle and run a complete charge cycle. The scan trigger draws a sharp inrush current when the cell is near minimum — a fully charged pack prevents false BMS trips that cut the unit out mid-scan during initial use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error on a new SB10N pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Ni-MH pack can sit at a low resting voltage after shipping, and some Denso cradles interpret this as a fault rather than a discharged cell. The dock checks cell voltage on contact before initiating the charge cycle — if it reads below its acceptance threshold, it throws an error instead of charging. Wipe the battery contacts and cradle terminals with a dry cloth, reseat the pack firmly, and remove any debris from the bay. If the error clears, let the cradle complete a full charge to 2.4V before pulling the scanner for use.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner drops wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring fast barcode scanning, the radio and the scan trigger fire simultaneously, creating a combined inrush spike that can pull cell voltage below the radio module's minimum operating threshold for a fraction of a second. When that happens, the wireless stack drops its connection and must re-associate — users see the scanner pause or lose its session mid-task. This is more pronounced when the cell is below 50% charge. Keep the pack above half charge during high-frequency scanning shifts, and avoid running the unit until the low-battery indicator triggers on a high-volume pick line.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324953231450,"sku":"BWCS-BHT10BL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324953264218,"sku":"BWCS-BHT10BL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324953296986,"sku":"BWCS-BHT10BL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BHT10BL-1.webp?v=1778123427","url":"https:\/\/batteryweb.com\/products\/denso-gt10b-replacement-battery-24v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}