{"product_id":"dentsply-x-smart-replacement-battery-12v-700mah-ni-mh","title":"Dentsply X-SMART 12V Ni-MH Replacement Battery A1007000001","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDentsply X-Smart Endodontic Motor — 12V Ni-MH Replacement Battery (A 1007 000 001 00)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 700mAh Ni-MH replacement battery for the Dentsply X-Smart cordless endodontic motor system. It fits the X-Smart, X-Smart Plus, and X-Smart Pro-Taper models used in root canal procedures. Capacity is 8.4Wh, matching the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX-Smart platform compatibility:\u003c\/strong\u003e\n    The X-Smart, X-Smart Plus, and X-Smart Pro-Taper share the same 12V Ni-MH cell format and connector pinout. The BMS in each model reads the same voltage curve, so this cell communicates correctly across all three variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the X-Smart platform. The BMS accepted the cell, completed its verification sequence, and held charge without triggering a false fault. Discharge curve stayed within the expected Ni-MH profile under motor load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test requirement:\u003c\/strong\u003e\n    After fitting this battery, let the X-Smart complete its full power-on self-test without interruption. The device runs a BMS verification cycle at startup. Cutting power during this sequence causes a fault flag that persists until the next clean reboot — it does not mean the cell is faulty.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eX-Smart BMS learn cycle on a new Ni-MH cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe X-Smart's charge IC applies a conservative charge limit when it first sees a new cell. This is intentional — the controller does not yet have a charge history to reference. After one complete charge-discharge cycle, the BMS builds a baseline and the cell is treated as a known quantity. Until that cycle runs, the device may report less than full capacity or flag a partial charge state. Run one full cycle before clinical use — not as a break-in ritual, but because the BMS requires it to set its thresholds correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eX-Smart shows low battery alarm immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the BMS self-test threshold is calibrated to an OEM cell that has already completed at least one cycle. A new cell's open-circuit voltage sits slightly outside the expected window, and the controller interprets this as a depleted state rather than a new cell. The fix is straightforward: run one full charge-discharge cycle and then recharge to 100%. After that cycle, the BMS accepts the cell's voltage curve and the low battery alarm clears. Confirm the charge is complete when the indicator holds steady at maximum and the motor responds at full torque.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381475410010,"sku":"BWCS-DSC107MD-1","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381475442778,"sku":"BWCS-DSC107MD-2","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381475475546,"sku":"BWCS-DSC107MD-3","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DSC107MD-1.webp?v=1778901051","url":"https:\/\/batteryweb.com\/products\/dentsply-x-smart-replacement-battery-12v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}