{"product_id":"dogtra-edge-transmitter-replacement-battery-74v-850mah-li-polymer","title":"Dogtra EDGE BP74TE Replacement Battery 7.4V 850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDogtra EDGE Transmitter — 7.4V Li-Polymer Replacement Battery (BP74TE)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 850mAh lithium-polymer battery replaces the OEM BP74TE cell in the Dogtra EDGE transmitter. It fits the EDGE TX, EDGE RT transmitter, and DA212 handheld remote units. The transmitter is the handheld controller that sends stimulation and tone signals to the receiver collar during dog training.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEDGE transmitter platform compatibility:\u003c\/strong\u003e\n    The EDGE TX, EDGE RT, and DA212 remotes share the same 7.4V Li-Polymer cell format, connector pinout, and BMS handshake protocol — one battery covers all three variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the EDGE transmitter's BMS at full stimulation output. The protection circuit responded correctly to over-discharge and over-current conditions, and charge acceptance matched OEM charge curves throughout the test cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eTransmitter storage between training sessions:\u003c\/strong\u003e\n    If the EDGE transmitter will sit unused for more than two weeks, power it off completely rather than leaving it in standby — the standby draw on Li-Polymer cells accelerates capacity fade faster than full shutdown storage.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the EDGE transmitter shows low battery immediately after a new cell install\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells ship at a storage charge of roughly 3.7V per cell — about 50% of usable capacity. The EDGE transmitter's fuel gauge reads this as low battery because it calibrates against a full 8.4V pack. Charge the replacement battery fully before the first training session. A complete charge cycle lets the BMS recalibrate its state-of-charge baseline, and the indicator should read correctly from that point forward.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eEDGE transmitter not turning on after the battery has been swapped\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the transmitter shows no response after fitting the replacement cell, the BMS may have entered a deep-discharge lockout state from the depleted original battery sitting in the unit. Connect the transmitter to its Dogtra charger and leave it for 15–20 minutes before pressing the power button — the charger applies a low-current trickle that satisfies the BMS unlock condition. Once the BMS re-initialises, normal charge behaviour resumes. If the unit still does not respond, confirm the battery connector is fully seated and the pack voltage reads at least 6.0V with a multimeter before assuming a fault.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360159858778,"sku":"BWCS-SDE74SL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360159891546,"sku":"BWCS-SDE74SL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360159924314,"sku":"BWCS-SDE74SL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SDE74SL-1.webp?v=1778610901","url":"https:\/\/batteryweb.com\/products\/dogtra-edge-transmitter-replacement-battery-74v-850mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}