{"product_id":"dolmar-ah-3756-xe3-replacement-battery-144v-1500mah-li-ion","title":"Dolmar AH-3756 XE3 14.4V Replacement Battery 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDOLMAR AH-3756 XE3 Series — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 1500mAh Li-ion replacement battery for DOLMAR cordless power tools. It fits the AH-3756 XE3, AH1853H, AH3766X3, AH-3766 XE3, and seven additional models in the same voltage platform. Capacity is 21.6Wh — matching the original specification for this tool family.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e14.4V platform compatibility:\u003c\/strong\u003e\n    These models share the same 14.4V cell configuration, connector footprint, and BMS communication protocol. Swapping within this platform keeps the charger handshake intact and avoids false fault codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the pack through motor-start inrush cycles on a 14.4V drill platform. The BMS held the overcurrent threshold correctly on repeated cold trigger pulls without tripping into protection mode.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use load conditioning:\u003c\/strong\u003e\n    Run the tool at half load for two cycles before maximum torque applications. This lets the BMS profile the motor's inrush current draw and set accurate overcurrent thresholds before you push the pack hard.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on trigger-pull inrush surge in 14.4V DOLMAR tools\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on a drill or circular saw, the motor draws a spike of current — often three to five times the running load — for the first fraction of a second. If the BMS overcurrent threshold is set conservatively or the cells are cold, this spike can trigger an immediate protection cutoff. The tool goes dead at the moment of trigger pull, not under sustained load. Warming the battery to room temperature and starting under light load on the first cycle resets the BMS threshold calibration and prevents nuisance trips.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTool bogs under load and recovers when you release the trigger\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is voltage sag — the cell voltage drops under load faster than the BMS can compensate, causing the tool to lose torque mid-cut. The most common cause is high contact resistance at the battery rail, either from oxidised terminals or a worn latch that allows slight movement under vibration. Clean the battery contacts with isopropyl alcohol and check that the pack seats with firm mechanical engagement. If sag continues after cleaning, measure the rail voltage under load — a drop below 12.5V during normal drilling indicates cell degradation rather than a contact issue.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416072192090,"sku":"BWCS-MKT130PW-1","price":52.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416072224858,"sku":"BWCS-MKT130PW-2","price":61.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416072257626,"sku":"BWCS-MKT130PW-3","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MKT130PW-1.webp?v=1779760142","url":"https:\/\/batteryweb.com\/products\/dolmar-ah-3756-xe3-replacement-battery-144v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}