{"product_id":"doro-8050-replacement-battery-38v-2700mah-li-polymer","title":"Doro 8050 Replacement Battery DBV-3000A 3.8V 2700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDoro 8050 \/ DBS-0230 — 3.8V Li-Polymer Replacement Battery (DBV-3000A)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 2700mAh Li-Polymer replacement battery for the Doro 8050 smartphone and DBS-0230 variant. It uses OEM part number DBV-3000A and matches the original cell dimensions at 73.60 × 61.70 × 4.00mm. Fits the Doro 8050 directly without modification to the housing or connector.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e8050 and DBS-0230 compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay geometry, connector pinout, and BMS handshake protocol — one cell covers both. The 3.8V nominal rail matches what the Doro charge IC expects on the SDA\/SCL lines.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Doro 8050 charge IC and confirmed BMS communication, thermal cutoff response, and charge termination at 4.35V. The fuel gauge IC accepted the cell without flagging a BMS mismatch error.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    Disable fast charging for the first complete discharge-charge cycle after installation. This gives the fuel gauge IC one clean pass against the new cell's discharge curve before high-current charging begins on an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Doro 8050 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Doro 8050's fuel gauge IC stores a discharge curve from the original cell. When a new cell goes in, the IC still references that old curve. At around 20–30% reported charge, the new cell's actual voltage drops below the point the modem and display can sustain load — the phone cuts out even though the gauge shows capacity remaining. This is a voltage cliff caused by curve mismatch, not a faulty battery. Run one full discharge to auto-shutdown followed by a full charge to 100% to let the coulomb counter recalibrate. After that cycle, reported percentage should track real cell voltage accurately.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone warm near the battery compartment on first charge after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-Polymer cell has higher internal impedance than a broken-in cell. On the first charge cycle, the Doro charge IC pushes current into that higher-impedance cell, generating more heat than usual. This is normal and typically resolves after two to three cycles as the cell's impedance drops. If the phone feels hot to the touch — above roughly 45°C — pause charging, let it cool, then resume at a lower charge rate by disabling fast charging in the phone's battery settings.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391794217050,"sku":"BWCS-DEP805SL-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391794249818,"sku":"BWCS-DEP805SL-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391794282586,"sku":"BWCS-DEP805SL-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEP805SL-1.webp?v=1779142036","url":"https:\/\/batteryweb.com\/products\/doro-8050-replacement-battery-38v-2700mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}