{"product_id":"dreame-m12-replacement-battery-216v-3700mah-li-ion","title":"Dreame M12 Replacement Battery 21.6V 3700mAh W2206","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDreame M12 \/ M12 Pro \/ M13 — 21.6V Li-ion Replacement Battery (W2206)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 21.6V 3700mAh Li-ion replacement battery for the Dreame M12, M12 Pro, and M13 cordless stick vacuums. It fits directly into the battery bay of each model and uses the same OEM part number W2206 as the factory cell. Order this when the original pack no longer holds a useful charge or fails to power the motor at full speed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM12, M12 Pro, and M13 compatibility:\u003c\/strong\u003e\n    All three models share the same 21.6V battery platform, connector pinout, and BMS communication protocol. One replacement cell covers the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge cycles on an M12 unit and monitored BMS handshake, cutoff voltage, and cell balancing across the pack. The BMS accepted the replacement without fault codes or charge refusal.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the M12 series:\u003c\/strong\u003e\n    Do not leave the vacuum seated on the charging dock continuously. The M12 dock does not switch to a true standby mode — it continues to trickle charge, which accelerates capacity fade in Li-ion cells. Charge to full, then remove the unit from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping on carpet before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn carpet, the M12 motor draws significantly more current than on hard floors. If the filter is partially blocked, airflow restriction forces the motor to sustain a higher draw than the BMS current threshold allows. The BMS responds by reducing output voltage to the motor, which the user experiences as suction loss — even though the indicator still shows charge remaining. Clean or replace the filter first, then retest. If suction restores on hard floor but still drops on carpet, the issue is sustained overcurrent draw, not cell capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out briefly then recovers during a cleaning run\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a faulty battery. It happens when the motor pulls above the pack's rated discharge current — most often caused by a blocked filter or a partial clog in the suction path. The BMS cuts power to protect the cells, then resets after a short pause. Clear the blockage and confirm the filter is clean before assuming the replacement cell is at fault. A fully clean airpath should eliminate the trip entirely.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426483699802,"sku":"BWCS-DRM120VX-1","price":98.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426483732570,"sku":"BWCS-DRM120VX-2","price":116.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426483765338,"sku":"BWCS-DRM120VX-3","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DRM120VX-1.webp?v=1779933418","url":"https:\/\/batteryweb.com\/products\/dreame-m12-replacement-battery-216v-3700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}