{"product_id":"dreame-r20-slim-replacement-battery-259v-2700mah-li-ion","title":"Dreame R20 Slim Compatible Battery 25.9V 2700mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDreame R20 Slim — 25.9V Li-ion Replacement Battery (V2524-7S1P-GYA)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.9V 2700mAh Li-ion battery for the Dreame R20 Slim and VRV31E-EU-A00 cordless stick vacuum. It matches the original part number V2524-7S1P-GYA and connects to the same 7-series cell arrangement and BMS as the factory unit. Fit it when the original no longer holds a useful charge or fails to power the motor at full speed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eR20 Slim and VRV31E-EU-A00 fitment:\u003c\/strong\u003e\n    Both models run the same 7S1P 25.9V cell configuration and use the same BMS communication protocol. The connector, latch, and handshake are shared across this variant family, so one replacement cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the battery through a full charge-discharge cycle on the R20 Slim platform. The BMS accepted the charge profile without fault codes, cell balancing completed correctly, and the motor started cleanly across low, medium, and max suction modes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on cordless vacuums:\u003c\/strong\u003e\n    Do not leave the R20 Slim sitting on its charging dock permanently. Continuous trickle charge from the dock degrades cell capacity noticeably faster than charging only when the battery is depleted. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe R20 Slim motor draws significantly more current when airflow is restricted — a partially blocked filter or clogged brush roll pushes draw well above the rated load. The BMS reads this sustained overcurrent as a low-cell-voltage event and steps the motor back before the indicator reflects it. The battery itself is not at fault. Clean the filter and check the brush roll, then retest — motor output at max mode should hold steady above 22V under normal load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean and then recovers after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the vacuum encounters a sustained blockage — thick carpet, a clogged inlet, or a jammed brush — the motor current spikes and the BMS disconnects the output to protect the cells. The brief pause allows the BMS to reset and the motor restarts. Clear the blockage, check the filter for restriction, and test again. If trips repeat on a clear machine, measure pack voltage at rest — it should read at least 25.2V fully charged.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43306859921498,"sku":"BWCS-XMG910VX-1","price":111.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43306859954266,"sku":"BWCS-XMG910VX-2","price":131.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43306859987034,"sku":"BWCS-XMG910VX-3","price":146.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-XMG910VX_1.webp?v=1777768792","url":"https:\/\/batteryweb.com\/products\/dreame-r20-slim-replacement-battery-259v-2700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}