{"product_id":"dreame-z30-replacement-battery-296v-3200mah-li-ion","title":"Dreame Z30 Replacement Battery 29.6V 3200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDreame Z30 \/ Z40 Series — 29.6V Li-ion Replacement Battery (V2406-8S1P-GYA)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 29.6V 3200mAh lithium-ion battery replaces the original pack in the Dreame Z30, Z40, and Z40 Station cordless stick vacuums. It uses OEM part number V2406-8S1P-GYA and matches the stock voltage, capacity, and BMS communication the motor controller expects. Fit it when the original pack no longer sustains suction through a full cleaning session.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eZ30, Z40, and Z40 Station compatibility:\u003c\/strong\u003e\n    These three models share the same 29.6V battery rail, connector pinout, and BMS handshake protocol. The Z40 Station adds a dock but draws from the same cell configuration, so one pack covers all three without any adapters or firmware differences.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack on the Z30 motor controller under sustained high-suction load. The BMS held the discharge curve through multiple full cycles without triggering overcurrent cutoff, and the fuel-gauge indicator tracked accurately across all power modes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the Z40 Station:\u003c\/strong\u003e\n    The Z40 Station makes it easy to leave the vacuum docked permanently. Continuous trickle charging accelerates capacity fade in Li-ion cells. Charge to full, then lift the vacuum off the dock until the next session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the motor draws more current when airflow is restricted — a partially blocked filter forces the motor to work harder, pulling the cell voltage down faster than the indicator predicts. The BMS reads actual cell voltage, not a fixed time curve, so voltage sag under high draw triggers a power reduction before the LED shows low. The result looks like a weak battery when the real cause is filter restriction. Clean or replace the filter first, then test the pack — suction should hold steady until the indicator genuinely reaches the low threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-use then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is the BMS tripping on overcurrent protection, not cell failure. It triggers when sustained suction blockage — carpet pile, a partial clog, or a dirty filter — spikes current draw above the BMS cutoff threshold. The pack disconnects briefly, cools the FETs, then reconnects. The fix is not a new battery. Clear the blockage, clean the filter, and confirm there is no debris at the brush head. If cutouts stop after clearing the airflow path, the pack is functioning correctly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426404139098,"sku":"BWCS-DRZ400VX-1","price":131.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43426404171866,"sku":"BWCS-DRZ400VX-2","price":155.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43426404204634,"sku":"BWCS-DRZ400VX-3","price":173.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DRZ400VX-1.webp?v=1779933071","url":"https:\/\/batteryweb.com\/products\/dreame-z30-replacement-battery-296v-3200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}