{"product_id":"dyson-v10-replacement-battery-252v-2500mah-li-ion","title":"Dyson V10 Cordless Vacuum Replacement Battery 25.2V 2500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eDyson V10 Cyclone Series — 25.2V Li-ion Replacement Battery (969352-02)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 25.2V 2500mAh (63Wh) lithium-ion battery replaces the original cell in the Dyson V10, Cyclone V10, and V10 Absolute cordless stick vacuums. It fits the SV12 platform and matches OEM part numbers 969352-02 and 206340. Capacity figure is from the product specification — not extrapolated from the original cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV10 SV12 platform fit:\u003c\/strong\u003e\n    All V10 variants — Absolute, Animal, Fluffy, and Total Clean — share the same SV12 motor board and battery connector. The BMS handshake protocol is identical across the range, so one cell covers the full series without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell on an SV12 unit through full charge and discharge cycles. The BMS reported accurate state-of-charge, the motor spun up cleanly across all three power modes, and no overcurrent faults were logged during sustained MAX mode operation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the V10:\u003c\/strong\u003e\n    Do not leave the V10 sitting on the wall dock permanently. Continuous trickle charging compresses cell capacity faster than standard use does. Charge to full, then remove from the dock until the next clean.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe V10 motor draws significantly more current when the filter is partially blocked or the bin is full — the motor fights restriction rather than airflow. Under that elevated draw, cell voltage sags early and the BMS throttles output before the LED indicator registers a low state. The vacuum feels like it's losing charge when the real cause is mechanical restriction upstream of the motor. Clean the filter and empty the bin first — if suction recovers immediately, the battery was never the problem.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a failed battery. When sustained suction restriction forces the motor to draw beyond the cell's rated discharge threshold, the BMS opens the circuit to protect the cell — then resets once current demand drops. It happens most often on MAX mode with a partially blocked cyclone head or compressed filter. Clear the restriction, reset the vacuum by switching off and back on, and confirm resting cell voltage sits above 22V before resuming.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428031135834,"sku":"BWCS-DYC100VX-1","price":93.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428031168602,"sku":"BWCS-DYC100VX-2","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428031201370,"sku":"BWCS-DYC100VX-3","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DYC100VX-1.webp?v=1779933900","url":"https:\/\/batteryweb.com\/products\/dyson-v10-replacement-battery-252v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}