{"product_id":"ecovacs-deebot-dj35-replacement-battery-144v-2600mah-li-ion","title":"Ecovacs Deebot DJ35 Replacement Battery 14.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eEcovacs Deebot DJ35 Series — 14.4V Li-ion Replacement Battery (S08-LI-144-2500)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 2600mAh Li-ion battery for the Ecovacs Deebot DJ35 robotic vacuum and related models including the DJ36, DN55, and DN520. It replaces OEM part S08-LI-144-2500. Fits the robot's battery bay directly and connects to the same BMS communication circuit as the factory cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDJ35, DJ36, DN55, DN520 platform:\u003c\/strong\u003e\n    These models share the same 14.4V nominal voltage rail and S08-LI-144-2500 form factor. The connector pinout and BMS handshake protocol are identical across the range, so one cell serves all listed variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through full charge and discharge on the Deebot platform. The BMS correctly reported state of charge to the robot's onboard controller, and overcurrent protection tripped appropriately when we induced a stall condition on the brush motor.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline:\u003c\/strong\u003e\n    Do not leave the Deebot sitting on its charging dock permanently between cleans. Continuous trickle charging accelerates capacity fade in Li-ion cells at this voltage. Charge to full, then remove from dock until the next cleaning session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Deebot's motor controller reduces power when cell voltage sags under load — this happens well before the indicator flags a low battery. A partially blocked filter or tangled brush roll forces the motor to draw above its rated current, which causes the voltage at the cell terminals to dip early. The BMS interprets this sag as a near-depleted pack and scales back motor output. Clear the filter and brush roll first; if suction recovers, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the brush motor stalls — usually on carpet fringe or a clogged intake — current spikes beyond the cell's rated discharge limit and the BMS opens the circuit. After a short rest, cell temperature drops, the BMS resets, and the robot resumes. The fix is to remove the obstruction from the brush and clean the filter until airflow is unrestricted. If trips continue on a clear brush with a new battery, check that cell voltage at rest is above 14.0V before concluding the pack is faulty.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428027367514,"sku":"BWCS-EDN350VX-1","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428027400282,"sku":"BWCS-EDN350VX-2","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428027433050,"sku":"BWCS-EDN350VX-3","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDN350VX-1.webp?v=1779933901","url":"https:\/\/batteryweb.com\/products\/ecovacs-deebot-dj35-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}