{"product_id":"ecovacs-deebot-dw700-replacement-battery-12v-2500mah-ni-mh","title":"Ecovacs Deebot DW700 12V Replacement Battery H-SC3000P","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eEcovacs Deebot DW700 Series — 12V Ni-MH Replacement Battery (H-SC3000P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 2500mAh Ni-MH replacement battery for the Ecovacs Deebot DW700 robotic vacuum cleaner. It fits the DW700, DW700-WR, DW701, and DS620 among others. Voltage and capacity match the original spec from the product data — 12V, 2500mAh, 30Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDW700 series compatibility:\u003c\/strong\u003e\n    The DW700, DW700-WR, DW701, and DS620 share the same 12V Ni-MH pack format, connector pinout, and BMS communication protocol. Swapping between these models requires no modification — the same cell fits all.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on a DW700 unit. The BMS accepted the cell without fault codes, completed charge termination at the correct delta-V threshold, and the robot resumed normal navigation and cleaning sequences.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline for Ni-MH cells:\u003c\/strong\u003e\n    Ni-MH chemistry in robotic vacuums suffers faster capacity fade when left on the dock permanently. Once the DW700 completes a cleaning cycle and returns to charge, remove it from the dock after the charge light clears — do not use the dock as a storage stand between sessions.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDeebot DW700 losing suction before the battery indicator shows low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe DW700's motor draws peak current when fighting a partially blocked filter or restricted airflow path. A Ni-MH pack with even moderate capacity fade cannot sustain that current without voltage sag. The robot's BMS interprets the sag as low battery and reduces motor speed — suction drops even though the indicator still shows charge remaining. Clean or replace the filter first, then test again; if suction holds through a full cycle, the filter was the cause, not the battery.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDW700 motor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a battery failure. When the suction path is restricted — blocked brush roll, clogged filter, or debris jam — the motor draws sustained current above the BMS threshold. The BMS cuts power to protect the cell, the robot pauses, and it restarts once the BMS resets. Clear the blockage and check that the filter is seated correctly. If the cutout continues on a clear path, measure pack voltage under load — it should hold above 10.8V during motor run.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427975856218,"sku":"BWCS-EDW700VX-1","price":78.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427975888986,"sku":"BWCS-EDW700VX-2","price":91.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427975921754,"sku":"BWCS-EDW700VX-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDW700VX-1.webp?v=1779933648","url":"https:\/\/batteryweb.com\/products\/ecovacs-deebot-dw700-replacement-battery-12v-2500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}