{"product_id":"ecovacs-deebot-ozmo-900-replacement-battery-144v-2600mah-li-ion","title":"Ecovacs Deebot Ozmo 900 14.4V Replacement Battery S01-LI-148","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eEcovacs Deebot Ozmo 900 Series — 14.4V Li-ion Replacement Battery (S01-LI-148-2600)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.4V 2600mAh lithium-ion battery replaces the original power cell in the Ecovacs Deebot Ozmo 900, 901, 905, and 930 robot vacuums, along with 43 additional compatible models. It slots into the underside battery bay and connects via the original multi-pin connector. Voltage and capacity match OEM spec: 14.4V, 2600mAh (37.44Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOzmo 900 series compatibility:\u003c\/strong\u003e\n    The 900, 901, 905, and 930 all share the same 14.4V battery rail, connector pinout, and BMS handshake protocol. One cell fits all four without any modification to the bay or wiring.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge-discharge cycles on the Ozmo 900 platform. The BMS communicated correctly with the dock charger, accepted charge without fault codes, and discharged evenly across cells with no mid-cycle cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on robot vacuums:\u003c\/strong\u003e\n    Do not leave the Deebot on the dock permanently between uses. Continuous trickle charging accelerates capacity fade on lithium cells in this format. Charge to full, then lift the unit off the dock until the next scheduled run.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Ozmo 900 motor draws significantly more current when the filter is partially blocked or the brush roll is restricted. When draw spikes above the BMS threshold, the cell voltage sags — the motor slows and suction drops, even though the battery indicator still shows a mid or high charge level. This is not a battery fault. Clean the filter and clear the brush roll, then retest. If suction stays consistent through a full cycle after cleaning, the battery is working correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA brief cutout followed by automatic recovery is a BMS overcurrent trip, not a motor failure. It triggers when sustained high motor draw — usually from a blocked filter or tangled brush — pushes current past the cell's protection threshold. The BMS disconnects the load for a few seconds, then resets once current demand falls. Check and clean the filter first. If trips continue on a clean filter, measure resting voltage at the dock contacts — it should read between 16.4V and 16.8V at full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428010655834,"sku":"BWCS-EDN900VX-1","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428010688602,"sku":"BWCS-EDN900VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428010721370,"sku":"BWCS-EDN900VX-3","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EDN900VX-1.webp?v=1779933823","url":"https:\/\/batteryweb.com\/products\/ecovacs-deebot-ozmo-900-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}