{"product_id":"ecovacs-dibea-k6l-replacement-battery-144v-1800mah-ni-mh","title":"Ecovacs Dibea K6L 14.4V Replacement Battery 1800mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eEcovacs Dibea K6L \/ ZN101 Series — 14.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 1800mAh Ni-MH replacement battery for the Ecovacs Dibea K6L robotic vacuum and compatible models including the L6, ZN101, and Dibea K6. It powers the drive motors, suction fan, and onboard navigation during cleaning cycles. Swap it in when the original cell no longer holds enough charge to complete a full floor pass.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDibea K6L, L6, ZN101 and K6 platform:\u003c\/strong\u003e\n    These models share the same 14.4V motor rail, battery bay dimensions, and connector pinout. One battery cell covers all of them without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on a Dibea-platform unit. The BMS held cutoff correctly at low voltage and accepted charge from the stock dock charger without fault codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on Ni-MH cells:\u003c\/strong\u003e\n    Do not leave the K6L sitting on the charging dock indefinitely between uses. Ni-MH chemistry degrades faster under continuous trickle charge than Li-ion does. Charge the robot to full, then remove it from the dock until the next cleaning session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe K6L's suction fan motor draws significantly more current when the filter is partially blocked or the brush roll is restricted. That extra draw causes the battery voltage to sag under load before the cell is genuinely depleted. The onboard indicator reads state-of-charge at rest, not under load — so it still shows green while the motor is already starved. Clean the filter and check the brush roll for hair wrap before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-cycle then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When sustained suction restriction forces the motor to pull above the battery's rated continuous discharge current, the BMS cuts power to protect the cell. The pack resets itself once internal temperature drops, which is why the vacuum restarts on its own. Clear the filter, empty the dustbin, and check for blockages in the intake path — then confirm the battery resting voltage reads above 12.0V before assuming the cell needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428057383002,"sku":"BWCS-DML608VX-1","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428057415770,"sku":"BWCS-DML608VX-2","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428057448538,"sku":"BWCS-DML608VX-3","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DML608VX-1.webp?v=1779934014","url":"https:\/\/batteryweb.com\/products\/ecovacs-dibea-k6l-replacement-battery-144v-1800mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}