{"product_id":"ecs-g600-replacement-battery-148v-4400mah-li-ion","title":"ECS G600 Replacement Battery 14.8V 4400mAh NBP6A2","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eECS G600 Series — 14.8V Li-ion Replacement Battery (NBP6A2)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.8V, 4400mAh (65.12Wh) Li-ion replacement battery for the ECS G600, G600L, and G610 notebooks. It slots into the original battery bay using the same connector and locking tab as the factory cell. Capacity comes from the product data — 4400mAh at 14.8V nominal.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eG600, G600L, and G610 fitment:\u003c\/strong\u003e\n    All three models share the same battery bay dimensions, connector pinout, and BMS handshake protocol. A single cell design covers the full platform — no wiring adapters or physical modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the NBP6A2 through charge and discharge cycles on a G600 unit. The BMS negotiated correctly with the system board, protection circuits tripped at expected voltage thresholds, and the fuel gauge IC updated without manual intervention after two cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install discharge cycle on the G600:\u003c\/strong\u003e\n    After fitting, run the laptop on battery until it hibernates from low power — do not interrupt. Then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health immediately after fitting the NBP6A2\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe G600 BIOS reads health data from EEPROM registers carried over from the old cell — not from the new one. When a replacement arrives, those registers still reflect the degraded state of the battery you just removed. The system hasn't yet measured the new cell's actual capacity. Running one complete discharge-to-hibernate followed by a full uninterrupted charge forces the BIOS to rewrite those registers against real measured data. After that cycle, health reporting normalises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eG600 shutting down at 20–30% charge showing on the OS gauge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff failure — not a calibration issue. Under combined CPU and display load, the cell voltage drops faster than the fuel gauge IC expects, and the system hits the low-voltage cutoff before the percentage reading catches up. It happens most often in the first few cycles on a new cell, when the fuel gauge IC hasn't yet mapped the discharge curve of the replacement chemistry. Run two to three full discharge-and-charge cycles. If the shutdowns continue past that point, check that the BIOS is not running an aggressive low-voltage threshold setting — on some G600 units this is adjustable and may have been changed by a previous user.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409799151706,"sku":"BWCS-ADM800NB-1","price":139.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43409799184474,"sku":"BWCS-ADM800NB-2","price":160.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43409799217242,"sku":"BWCS-ADM800NB-3","price":176.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ADM800NB-1.webp?v=1779580970","url":"https:\/\/batteryweb.com\/products\/ecs-g600-replacement-battery-148v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}