{"product_id":"edding-portable-12-replacement-battery-18v-3000mah-li-ion","title":"Edding Portable 12 Replacement Battery 18V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eEdding Portable 12 \/ LO-G-PO-12 — 18V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 18V, 3000mAh (54Wh) Li-ion battery is a direct replacement for the Edding Portable 12 and LO-G-PO-12 cordless power tools. It matches the original voltage rail and physical form factor. Swap it in when your original pack no longer holds a charge or fails to seat on the charger.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePortable 12 and LO-G-PO-12 compatibility:\u003c\/strong\u003e\n    Both models run the same 18V rail and use an identical battery housing and connector. One pack covers both — no adapter or wiring change needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge cycles and triggered motor-start inrush loads. The BMS held its overcurrent threshold without nuisance tripping and recovered cleanly after each discharge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use load conditioning:\u003c\/strong\u003e\n    On first use, run the tool at half load for two cycles before full torque applications. This lets the BMS profile your motor's inrush current draw and set accurate overcurrent protection thresholds before you push it hard.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on motor-start inrush surge in the Portable 12\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on a cordless tool, the motor draws a spike of current — often three to five times the running load — for a fraction of a second. If the BMS hasn't profiled your motor yet, it can read that spike as a fault and cut power immediately. This is not a dead battery; it's an overcurrent trip. Run the tool at moderate load for two cycles and the BMS recalibrates. After that, full-load trigger pulls should not cause nuisance cutoffs.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising this pack after it's been sitting in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the pack drops below roughly 2.5V per cell, most chargers refuse to start a charge cycle — the pack sits on the dock with no response or a blinking red indicator. To recover it, look for a \"recovery\" or \"wake\" mode on your charger if one exists. If your charger lacks that mode, a compatible Li-ion charger with a boost or trickle function can bring the cells back above the 3.0V acceptance threshold, after which normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416052465754,"sku":"BWCS-MTK570PW-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416052498522,"sku":"BWCS-MTK570PW-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416052531290,"sku":"BWCS-MTK570PW-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTK570PW-1.webp?v=1779759859","url":"https:\/\/batteryweb.com\/products\/edding-portable-12-replacement-battery-18v-3000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}