{"product_id":"elektronika-7a-replacement-battery-144v-2600mah-li-ion","title":"Elektronika 7A 14.4V Cordless Vacuum Replacement Battery 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eElektronika 7A — 14.4V Li-ion Replacement Battery (4UR18650A-FL)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 2600mAh Li-ion battery for the Elektronika 7A cordless vacuum cleaner. It replaces OEM part 4UR18650A-FL and restores full motor power to the vacuum's suction system. Capacity figure comes from the product data — 37.44Wh total energy storage.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eElektronika 7A compatibility:\u003c\/strong\u003e\n    The 7A platform runs a 14.4V motor rail with a specific connector and BMS handshake. This replacement matches that voltage and communicates correctly with the vacuum's charge and discharge circuitry, so the device powers on and accepts a charge without fault codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the 7A motor load. The BMS held voltage steady under sustained suction draw and triggered cutoff cleanly when the pack reached its low-voltage threshold — no premature shutoff at partial state of charge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging practice for the 7A:\u003c\/strong\u003e\n    Do not leave the 7A sitting on its charging dock between uses. Continuous trickle charging accelerates capacity fade on Li-ion cells at this voltage. Charge to full, remove from the dock, and return it only when the pack is depleted.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the pack can deliver cleanly — usually from a restricted filter forcing the motor to work harder. The BMS reads that elevated draw as a voltage sag and begins throttling output before the indicator catches up. Clean or replace the filter first. If suction recovers immediately after cleaning the filter, the battery was reacting to the restriction, not failing. If sag continues on a clear filter with a fresh battery, check that the cell voltage sits at or above 16.4V immediately after a full charge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — blocked brush roll, clogged filter, or a sealed inlet — the motor stalls partially and pulls a sustained spike of current. The BMS cuts the circuit to protect the cell, then resets once current drops. Clear any blockage at the brush roll and inlet, then check the filter. If the cutout stops after clearing the restriction, the battery and BMS are functioning correctly. Repeat trips on a clear machine with a new battery point to a motor bearing fault drawing excess current.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426428190810,"sku":"BWCS-REK710VX-1","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426428223578,"sku":"BWCS-REK710VX-2","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426428256346,"sku":"BWCS-REK710VX-3","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-REK710VX-1.webp?v=1779933315","url":"https:\/\/batteryweb.com\/products\/elektronika-7a-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}