{"product_id":"eta-0449-replacement-battery-144v-1500mah-ni-mh","title":"ETA 0449 Cordless Vacuum Replacement Battery 14.4V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eETA 0449 Moneto Series — 14.4V Ni-MH Replacement Battery (ETA0449)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 1500mAh Ni-MH replacement battery for ETA cordless stick and handheld vacuums in the 0449 range, including the 0449 90000 and 0449 Moneto. It slots into the original battery housing and connects to the same charging circuit as the factory cell. Capacity is 1500mAh (21.6Wh), matching the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e0449, 0449 90000, 0449 Moneto compatibility:\u003c\/strong\u003e\n    These three models share the same 14.4V battery rail, connector format, and BMS handshake. One cell covers all three variants — no wiring or adapter changes needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the ETA 0449 charging circuit and confirmed the BMS accepted the charge handshake, held voltage through sustained motor load, and tripped overcurrent correctly on a blocked intake simulation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for the 0449 Moneto:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock continuously between uses. The 0449's trickle charge keeps feeding the Ni-MH cell even when full, and that degrades capacity faster than normal cycling. Charge to full, then remove it from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the ETA 0449\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe 0449's motor pulls significantly more current when airflow is restricted — a partially clogged filter can push draw well above normal operating load. The BMS reads this sustained overcurrent as voltage sag and begins throttling output before the indicator registers a low state. The result is a real drop in suction performance while the battery appears to still have charge. Clean or replace the filter first — if suction recovers and the indicator reads normal, the battery is not the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean and then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the 0449 motor encounters sustained resistance — heavy carpet pile, a blockage, or a clogged filter — current spikes sharply and the BMS shuts output to protect the cell. After a few seconds the BMS resets and allows current flow again. The fix is to clear the blockage or clean the filter before restarting. If the motor continues tripping on an unobstructed clean run, check that pack voltage under load holds above 12V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43303970734170,"sku":"BWCS-ETM449VX-1","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43303970766938,"sku":"BWCS-ETM449VX-2","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43303970799706,"sku":"BWCS-ETM449VX-3","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ETM449VX_1.webp?v=1777520716","url":"https:\/\/batteryweb.com\/products\/eta-0449-replacement-battery-144v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}