{"product_id":"fabrica-tablet-pc-101-replacement-battery-37v-3000mah-li-polymer","title":"Fabrica Tablet PC 10.1 Compatible Battery 3.7V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFabrica Tablet PC 10.1 — 3.7V Li-Polymer Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 3000mAh (11.1Wh) lithium-polymer battery for the Fabrica Tablet PC 10.1. It replaces the original cell when the tablet no longer holds a charge or powers on. Dimensions are 112.65 × 68.00 × 3.50mm — verify these against your existing cell before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFabrica Tablet PC 10.1 fitment:\u003c\/strong\u003e\n    This tablet uses a flat Li-Polymer pouch cell with a low-voltage 3.7V nominal rail. The connector pinout and cell dimensions match the original, so no adapter or modification is needed at the connector.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the bench. The BMS accepted the charge IC handshake without fault flags, and cell voltage held stable across the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap fuel gauge reset:\u003c\/strong\u003e\n    After fitting this battery, run the tablet down to automatic shutoff once, then charge it uninterrupted to 100%. This forces the fuel gauge IC to recalibrate against the new cell's actual capacity and clears the inaccurate percentage readings that commonly appear after a swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTablet shutting down at 15–25% after battery replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC is still calibrated to the old, degraded cell. When the new cell hits roughly 3.6–3.7V under display and WiFi load combined, the controller reads that voltage against the old discharge curve and triggers an early shutoff. The fix is one complete discharge-to-cutoff cycle followed by a full uninterrupted charge. After that single cycle, the IC maps the new cell's curve and the early shutdowns stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFast charging not available after swapping the battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSome tablets withhold fast-charge negotiation until the charge IC has completed at least one accepted charge cycle on the new cell. Until that cycle completes, the device defaults to standard 5V charging as a precaution. Plug in with the original cable and charger and allow one full charge from low to 100% without interruption. Fast charge should be available from the next session once the cycle is logged.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43425987756122,"sku":"BWCS-BLP200SL-1","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43425987788890,"sku":"BWCS-BLP200SL-2","price":31.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43425987821658,"sku":"BWCS-BLP200SL-3","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BLP200SL-1.webp?v=1779930008","url":"https:\/\/batteryweb.com\/products\/fabrica-tablet-pc-101-replacement-battery-37v-3000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}