{"product_id":"falk-f5-replacement-battery-37v-1200mah-li-polymer","title":"Falk F5 GPS Navigator Compatible Battery 3.7V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFalk F5 \/ F8 \/ F10 \/ F12 — 3.7V Li-Polymer Replacement Battery (BLP5040835007212)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1200mAh lithium-polymer cell replaces the original battery in the Falk F5, F8, F10, and F12 portable GPS navigators. It fits the flat-pack battery bay these four models share and matches the OEM connector pinout. Capacity is 1200mAh as specified by Falk for this battery slot.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eF5, F8, F10, F12 fitment:\u003c\/strong\u003e\n    These four Falk navigators use the same 59 × 37 × 5.80mm flat Li-Polymer cell on a shared hardware platform. The BMS handshake, connector, and voltage rail are identical across all four, so one SKU covers the entire group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the GPS platform and confirmed the BMS accepted the charge curve without fault flags. Voltage at full charge held at 4.18–4.20V as expected for this cell chemistry.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-fix satellite acquisition after swap:\u003c\/strong\u003e\n    After fitting this cell, power the unit on outdoors before driving anywhere. A full power interruption clears the GPS receiver's ephemeris data, triggering a cold start. First satellite fix can take 5–10 minutes outdoors — subsequent warm starts drop back under a minute once the almanac is rebuilt.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Falk F5 shuts off without warning at low battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eAfter a battery swap, the fuel gauge IC loses its calibration reference. The device tracks remaining charge against a stale baseline, so the low-battery indicator never triggers before the cell hits the BMS cutoff floor. The unit goes dark with no warning bar shown. Run two or three full charge-to-cutoff cycles and the fuel gauge re-learns the cell's actual capacity curve, restoring the warning threshold to its correct position.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGPS accuracy dropping when battery charge falls below 20%\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSome Falk navigator firmware reduces GPS receiver sensitivity as supply voltage sags toward the low-battery threshold. This presents as position drift or a wider accuracy circle on the map — not a signal environment issue. The receiver is drawing less power and processing fewer satellite signals. Keep the cell above the 20% mark during active navigation, or connect USB power on longer routes to hold voltage steady.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377635197018,"sku":"BWCS-FKF8SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377635229786,"sku":"BWCS-FKF8SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377635262554,"sku":"BWCS-FKF8SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FKF8SL-1.webp?v=1778771766","url":"https:\/\/batteryweb.com\/products\/falk-f5-replacement-battery-37v-1200mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}