{"product_id":"feelworld-monitor-replacement-battery-74v-4400mah-li-ion","title":"Feelworld Monitor 7.4V Replacement Battery 4400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFeelworld Monitor — 7.4V Li-ion 4400mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 4400mAh Li-ion battery is a direct replacement cell for Feelworld field monitors used in professional video production. It slots into monitor battery bays that accept the standard NP-F form factor. Capacity is 4400mAh (32.56Wh) — pulled from product data, not estimated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFeelworld monitor compatibility:\u003c\/strong\u003e\n    Feelworld field monitors in the NP-F battery bay series share the same 7.4V nominal voltage rail and connector pinout. The BMS in these monitors reads cell voltage and status lines through that shared interface, so this cell communicates state-of-charge back to the monitor's on-screen indicator.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on an NP-F compatible monitor bay. The BMS accepted the cell on first install, state-of-charge readout tracked consistently across the discharge curve, and protection cutoff triggered cleanly at low-cell voltage without requiring a manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on Feelworld monitors:\u003c\/strong\u003e\n    Run one complete charge cycle through an NP-F compatible charger before mounting the battery on a live shoot. Some Feelworld monitor firmware maps the battery-remaining percentage to discharge thresholds calibrated during that first full charge — skipping it can cause the indicator to read erratically from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Feelworld monitor battery indicator jumps or reads incorrectly with a new cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eFeelworld monitors map their on-screen battery percentage to fixed voltage thresholds tuned for a cell that has been through at least one calibration cycle. A brand-new replacement cell has a slightly different resting voltage profile across its discharge curve until it has been fully charged and discharged once. This causes the monitor's firmware to mis-map the percentage — you may see it jump from 80% to 20% with no warning, or sit at full for longer than expected before dropping fast. Run one full charge-to-discharge cycle and the indicator will track accurately against the 7.4V nominal voltage curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFeelworld monitor shows no battery or cuts power while the cell still has charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the monitor's low-voltage cutoff triggers before the cell is actually depleted — usually because the BMS inside the replacement cell and the monitor's own protection circuit are both acting on slightly different voltage floor thresholds. The cell's internal BMS trips the output at its programmed cutoff, the monitor reads zero voltage on the pin, and shuts down. Pull the battery, check resting voltage with a multimeter — a healthy cell at cutoff should read no lower than 6.0V. If it reads above 6.0V, reinsert and do a single full charge cycle via an external NP-F charger before reinstalling.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333922783322,"sku":"BWCS-F750-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333922816090,"sku":"BWCS-F750-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333922848858,"sku":"BWCS-F750-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-F750-1.webp?v=1778213575","url":"https:\/\/batteryweb.com\/products\/feelworld-monitor-replacement-battery-74v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}