{"product_id":"fluke-1521-thermometer-replacement-battery-36v-2500mah-ni-mh","title":"Fluke 1521 Thermometer 3.6V Ni-MH Replacement Battery 1650740","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFluke 1521 \/ 1522 Thermometer — 3.6V Ni-MH Replacement Battery (1650740)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 2500mAh Ni-MH battery replacing OEM part 1650740 in the Fluke 1521 and 1522 Thermometers and the Testpath 140005. It fits directly into the battery compartment and connects to the instrument's power management circuit without modification. Capacity is drawn from the product specification — 9Wh total energy storage.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e1521, 1522, and Testpath 140005 compatibility:\u003c\/strong\u003e\n    All three instruments share the same 3.6V single-cell battery bay, connector pinout, and BMS communication line — one pack covers the entire group without adapter or rewiring.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the 1521's power-on and probe initialisation sequence. The BMS held the voltage rail steady through the current spike at probe power-up and did not trip into protection mode.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration cycle:\u003c\/strong\u003e\n    After fitting this battery, run a full calibration cycle through the instrument menu before field use. The 1521 maps battery state during that routine — skipping it causes the low-battery indicator to trigger early on the first measurement session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the 1521 sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day at room temperature. After extended storage, the pack voltage can drop below the BMS recovery threshold — typically around 2.8V for a single 3.6V Ni-MH cell — and the protection circuit latches off. The instrument shows nothing on the display and does not respond to the power button. Connecting the charger for 15–20 minutes delivers a trickle current that nudges the cell voltage above the recovery threshold, at which point the BMS re-initialises and normal charging resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings resetting or logging dropping out mid-session\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe 1521 draws sustained current through the probe interface during a logging session — more than the brief spike at startup. If the cell is partially depleted, voltage sags under that sustained load and the instrument's internal regulator drops out of regulation, causing a mid-session reset or data loss. This is not a firmware fault. Charge the battery fully before any logging session and confirm the instrument shows no low-battery indicator at the point you start recording. If dropout persists with a fully charged pack, check that the probe connector is fully seated — a loose connection increases contact resistance and amplifies voltage drop at the battery terminals.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360737132634,"sku":"BWCS-FBP152SL-1","price":31.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360737165402,"sku":"BWCS-FBP152SL-2","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360737198170,"sku":"BWCS-FBP152SL-3","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FBP152SL-1.webp?v=1778616258","url":"https:\/\/batteryweb.com\/products\/fluke-1521-thermometer-replacement-battery-36v-2500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}