{"product_id":"fluke-741-replacement-battery-72v-2200mah-ni-mh","title":"Fluke BP7217 741 Replacement Battery 7.2V 2200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFluke 741 \/ 743 Series — 7.2V Ni-MH Replacement Battery (BP7217)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.2V, 2200mAh Ni-MH replacement battery for the Fluke 741, 741B, 743, and 743B Documenting Process Calibrators, along with six additional compatible models. It slots into the same bay as the original BP7217 pack and uses the same connector. The calibrator draws a steady load across measurement, signal generation, and logging tasks — this pack is rated to handle that sustained draw without voltage sag cutting sessions short.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e741 and 743 series compatibility:\u003c\/strong\u003e\n    Both the 741 and 743 lines run the same 7.2V battery rail and share the BP7217 connector and BMS handshake. Fluke used identical battery architecture across these models to simplify field spares — one pack covers sourcing for both platforms.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through signal-generation and loop-calibration cycles on the 743B, monitoring cell voltage under sustained 4–20mA output load. The BMS held cutoff thresholds correctly and did not trip during probe initialisation current spikes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration cycle:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the instrument menu before taking it into the field. The 741 and 743 series map battery state during calibration routines — skipping this step causes the low-battery indicator to trigger early on the first measurement session, even with a fully charged pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the calibrator sat unused in a carry case for months\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day at room temperature. A pack stored for three to six months can drop below the BMS recovery threshold — typically around 5.4V for a 7.2V Ni-MH pack — and the BMS enters a protective sleep state. When this happens, the charger does not detect the pack as a valid load and the instrument shows nothing on power-up. To recover, apply a slow pre-charge at 100–200mA until cell voltage climbs above 6.0V, then resume normal charging.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings drifting or logging session resetting mid-run\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe 741 and 743 series sustain simultaneous sensor excitation, signal generation, and data logging — the combined draw is higher than standby current by a significant margin. If an aged or partially discharged cell group sags below the instrument's operating voltage floor during peak draw, the calibrator resets the active session to protect measurement integrity. This is not a firmware fault. Charge the pack fully, confirm resting voltage reads at or above 8.2V off the charger, then restart the logging session.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360792215642,"sku":"BWCS-PF7217SL-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360792248410,"sku":"BWCS-PF7217SL-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360792281178,"sku":"BWCS-PF7217SL-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PF7217SL-1.webp?v=1778616277","url":"https:\/\/batteryweb.com\/products\/fluke-741-replacement-battery-72v-2200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}