{"product_id":"fluke-dsx-5000-cableanalyzer-replacement-battery-74v-6800mah-li-ion","title":"Fluke DSX-5000 CableAnalyzer 7.4V Replacement Battery 479-568","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFluke DSX-5000 CableAnalyzer — 7.4V Li-ion Replacement Battery (479-568)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 6800mAh (50.32Wh) Li-ion battery replaces the OEM pack in the Fluke DSX-5000 CableAnalyzer, DSX Versiv, Versiv, and VERSIV2-M. These are professional cable certification instruments used for copper and fiber qualification on active network infrastructure. The pack fits the standard battery bay and connects via the same BMS handshake as the original Fluke 479-568.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDSX Versiv platform compatibility:\u003c\/strong\u003e\n    The DSX-5000, Versiv, and VERSIV2-M all share the same battery bay geometry, connector pinout, and BMS communication protocol — that is why one pack covers the full Versiv family. The instrument polls the battery's protection circuit on boot, and this pack responds to that handshake correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on a DSX Versiv unit, monitoring BMS response during probe initialisation and sustained cable sweep loads. The protection circuit held stable under both the start-up current spike and continuous logging draw without triggering a cutoff event.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install calibration cycle:\u003c\/strong\u003e\n    After installing this pack, run a full calibration cycle through the instrument's system menu before heading to a job site. The DSX-5000 maps battery state during calibration — skipping this step causes the instrument to flag premature low-battery warnings during your first certification session, which interrupts testing.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the DSX-5000 initialises its probe module\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the DSX-5000 powers on, it sends a burst of current to initialise the active probe and cable interface circuitry. On a weakened or deeply discharged original pack, this initialisation spike can exceed the battery's overcurrent threshold and trigger a protection cutoff before the instrument fully boots. This replacement pack is spec'd to handle that surge at 7.4V nominal without the BMS tripping on start-up. If the instrument still cuts out at probe init, check that the pack is charged above 7.8V before powering on.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings resetting mid-logging session during a cable sweep\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA sustained cable certification sweep pulls continuous current from the battery across dozens of measurement points per second. If cell voltage sags below the instrument's minimum operating threshold during this draw, the DSX-5000 will drop out and lose the in-progress result set. This is not a firmware fault — it is a voltage dropout event at the cell level. A fresh, fully charged pack at 8.4V eliminates the sag. If dropouts persist with this pack fully charged, check the battery contacts in the bay for oxidation and clean with a dry cloth before the next sweep.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360717668442,"sku":"BWCS-FDX500XL-1","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360717701210,"sku":"BWCS-FDX500XL-2","price":78.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360717733978,"sku":"BWCS-FDX500XL-3","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FDX500XL-1.webp?v=1778616209","url":"https:\/\/batteryweb.com\/products\/fluke-dsx-5000-cableanalyzer-replacement-battery-74v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}