{"product_id":"fluke-dsx-600-cableanalyzer-replacement-battery-74v-5200mah-li-ion","title":"Fluke DSX-600 Replacement Battery 7.4V 5200mAh 479-568","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFluke DSX-600 CableAnalyzer — 7.4V Li-ion Replacement Battery (479-568)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 5200mAh Li-ion battery replaces OEM part 479-568 in the Fluke DSX-600 and DSX-5000 CableAnalyzer series, including DSX Versiv and Versiv platforms. It slots into the same battery bay and connects through the same BMS handshake the instrument expects. Capacity is 5200mAh (38.48Wh), sourced direct from the product specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDSX Versiv platform compatibility:\u003c\/strong\u003e\n    The DSX-600, DSX-5000, and Versiv units share the same 7.4V battery bay, connector pinout, and BMS communication protocol. One pack covers all four model variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the DSX-600 power-on sequence and a sustained cable certification loop. The BMS held voltage within the instrument's operating window and passed the handshake check without triggering a battery fault flag.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration cycle:\u003c\/strong\u003e\n    After installing, run a full calibration cycle through the instrument menu before field deployment. The DSX maps battery state during calibration — skipping this step causes the low-battery warning to fire early on the first certification session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the DSX sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells drop below the BMS recovery threshold when a pack sits discharged for an extended period — common with test gear stored between project phases. Below roughly 2.5V per cell, the protection circuit latches off and blocks both charge and discharge. Connecting to the OEM charger may show no charge activity at all. Apply a low-current pre-charge using a compatible charger with a recovery mode, or connect to the DSX charger and leave it for 30–60 minutes — the BMS will often re-initialise once cell voltage climbs back above 2.8V per cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDSX-600 powers on but shuts off during USB data transfer to PC\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eUSB data transfer adds a second load path — the instrument drives its processor at full speed while simultaneously powering the USB subsystem. On a degraded or partially discharged pack, this combined draw creates a brief voltage sag that crosses the BMS undervoltage cutoff threshold. The shutdown happens cleanly, but the transfer session is lost. Charge the pack to full before any bulk export session, and check that cell voltage at idle reads above 7.2V — anything lower means the pack will sag under combined load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360721403994,"sku":"BWCS-FDX500SL-1","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360721436762,"sku":"BWCS-FDX500SL-2","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360721469530,"sku":"BWCS-FDX500SL-3","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FDX500SL-1.webp?v=1778616209","url":"https:\/\/batteryweb.com\/products\/fluke-dsx-600-cableanalyzer-replacement-battery-74v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}