{"product_id":"fresenius-injectomat-500-replacement-battery-6v-2000mah-ni-mh","title":"Fresenius Injectomat 500 6V Ni-MH Replacement Battery 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFresenius Injectomat 500 Series — 6V Ni-MH Replacement Battery (125-00-455100032)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 2000mAh Ni-MH replacement battery for the Fresenius Injectomat 500 and Injectomat 500D infusion pumps, as well as the MCM Agilia 500 and MCM Agilia 500D. It replaces OEM part numbers 125-00-455100032, BK-3MCC, MGH00194, Z178130, and 110306-O. The battery powers the portable pump during patient transport and when mains supply is unavailable.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInjectomat 500 and MCM Agilia 500 platform fit:\u003c\/strong\u003e\n    Both the Injectomat and MCM Agilia 500 series share the same 6V battery compartment, connector pinout, and BMS handshake protocol — one cell pack covers all variants in this family.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge acceptance and load draw testing. The BMS completed full charge handshake, and the protection circuit responded correctly to simulated over-discharge conditions without tripping a hard fault.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the Injectomat to complete its full power-on self-test cycle without interruption. The device runs a BMS verification sequence at startup — cutting power during this window flags a persistent battery fault that won't clear until the next complete reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSelf-test failure after battery swap on the Injectomat 500\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Injectomat 500 runs a BMS learn cycle on first installation to characterise the new cell's internal resistance and charge acceptance curve. A fresh Ni-MH cell straight from packaging has not yet completed this cycle, so the device may flag a battery fault even when the cell is fully charged. One complete charge-discharge cycle lets the BMS calibrate its thresholds to the new cell. Until that cycle completes, do not use the pump in an unmonitored clinical setting.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator stalling below 100% on the first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Injectomat's charge IC applies a conservative current limit when it detects elevated internal resistance on a new or storage-aged Ni-MH cell. This causes the charge indicator to plateau well below full and can trigger a premature charge-complete signal. The fix is to run one full charge cycle, allow the pump to discharge normally in use, then recharge to 100%. After this conditioning cycle, the charge IC recalibrates and the indicator reads accurately. Confirm the cell has reached at least 6.0V open-circuit before returning the pump to service.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381436088410,"sku":"BWCS-FVM300MD-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381436121178,"sku":"BWCS-FVM300MD-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381436153946,"sku":"BWCS-FVM300MD-3","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FVM300MD-1.webp?v=1778900838","url":"https:\/\/batteryweb.com\/products\/fresenius-injectomat-500-replacement-battery-6v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}