{"product_id":"fuhu-nabi-dreamtab-hd8-replacement-battery-37v-4350mah-li-polymer","title":"Fuhu Nabi DreamTab HD8 Replacement Battery 3.7V 4350mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFuhu Nabi DreamTab HD8 — 3.7V Li-Polymer Replacement Battery (SP5067112)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 4350mAh lithium-polymer battery replaces the original cell in the Fuhu Nabi DreamTab HD8 and DMTAB-IN08A tablet. It matches OEM part numbers SP5067112 and MLP4566111. Dimensions are 113.75 × 66.40 × 4.60mm — confirm your existing cell before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNabi DreamTab HD8 and DMTAB-IN08A compatibility:\u003c\/strong\u003e\n    Both models run the same charge IC and connector pinout on a shared 3.7V rail, so one cell covers both. The BMS handshake is identical across the two SKUs — no firmware difference affects charging behaviour.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the DreamTab HD8 platform. The BMS accepted the new cell without fault flags, and the charge IC reached termination voltage cleanly with no current spike at cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    After fitting this battery, run the tablet down to automatic shutoff from a full charge — do not interrupt the discharge. Then charge uninterrupted to 100%. This single cycle forces the fuel gauge IC to recalibrate against the new cell and clears the inaccurate percentage readings that typically appear after a swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDreamTab HD8 shutting down at 15–25% remaining\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DreamTab HD8 runs an 8-inch display alongside WiFi and background app processes simultaneously. Under that combined load, the cell voltage drops faster than the fuel gauge IC can track — the board reads a safe percentage but the actual terminal voltage has already crossed the low-voltage cutoff threshold. The BMS trips and shuts the device down before the screen reports zero. One full recalibration cycle — discharge to auto shutoff, then uninterrupted charge to 100% — resyncs the fuel gauge and pushes the premature cutoff point back to below 5%.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDreamTab HD8 showing wrong battery percentage after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe fuel gauge IC stored calibration data from the original cell — capacity, internal resistance curve, and discharge slope. A new cell has different characteristics, so the existing calibration reads incorrectly from the first boot. You will typically see the percentage jump or drop suddenly, or read 100% while the tablet shuts off within minutes. Force a recalibration: discharge fully to automatic shutoff, then charge in one uninterrupted session to 100% at 5V via the standard charge port.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43425971011674,"sku":"BWCS-NSB018SL-1","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43425971044442,"sku":"BWCS-NSB018SL-2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43425971077210,"sku":"BWCS-NSB018SL-3","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NSB018SL-1.webp?v=1779930024","url":"https:\/\/batteryweb.com\/products\/fuhu-nabi-dreamtab-hd8-replacement-battery-37v-4350mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}