{"product_id":"fuji-8ff60-replacement-battery-6v-2100mah-ni-mh","title":"Fuji 8FF60 6V Ni-MH Replacement Battery 2100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFuji 8FF60 \/ CVC-600 \/ CVT-60 \/ CVT-70 — 6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 6V, 2100mAh Ni-MH battery replaces the original cell in Fuji 8FF60, CVC-600, CVT-60, CVT-70, and over 59 additional compatible camera models. It supplies power to the imaging sensor, processor, and flash system. Capacity data comes from the product specification — 2100mAh, 12.6Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-model fit across the Fuji 6V platform:\u003c\/strong\u003e\n    These models share a common 6V power rail and compatible connector footprint. The BMS in each body draws the same voltage profile, so one cell chemistry covers the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a compatible camera body. The BMS accepted the cell after one full charge cycle via the OEM charger, and the battery-remaining indicator tracked consistently across the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on Ni-MH Fuji bodies:\u003c\/strong\u003e\n    Do not rely on the battery-remaining display on the very first use. Ni-MH cells need one full charge-to-discharge cycle inside the camera body before the BMS calibrates the indicator correctly. Run the first charge in the camera body, not an aftermarket external charger.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash not fully recycling between shots on a new replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe flash capacitor pulls a sharp recharge current immediately after each shot. On a Ni-MH cell that has not completed its first conditioning cycle, internal resistance is temporarily higher than rated. This causes the capacitor to recharge more slowly, and the camera may show a flash-ready indicator before the capacitor is fully charged. Run two full charge-discharge cycles before heavy flash work — internal resistance drops noticeably after conditioning and recycle times normalise.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera battery percentage jumping erratically on the display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells have a flatter discharge curve than Li-ion. Fuji camera bodies calibrated to a worn original cell often misread a new cell's voltage at equivalent charge states. The indicator may jump from 80% to 40% without a corresponding drop in performance. Run the cell down to the camera's low-battery cutoff, then charge fully in the camera body — this resets the BMS's voltage-threshold mapping to the new cell's actual curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333895061594,"sku":"BWCS-NP55-1","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43333895094362,"sku":"BWCS-NP55-2","price":41.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43333895127130,"sku":"BWCS-NP55-3","price":45.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP55-1.webp?v=1778213590","url":"https:\/\/batteryweb.com\/products\/fuji-8ff60-replacement-battery-6v-2100mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}