{"product_id":"fuji-8ff60-replacement-battery-6v-4200mah-ni-mh","title":"Fuji 8FF60 Replacement Battery 6V 4200mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFuji 8FF60 \/ CVC-600 Series — 6V Ni-MH 4200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 4200mAh Ni-MH replacement battery for Fuji camera models including the 8FF60, CVC-600, CVT-60, and CVT-70, plus over 59 additional compatible models. It matches the original cell's voltage rail and physical form factor. Capacity is rated at 25.2Wh from the manufacturer spec.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e8FF60 and CVC series compatibility:\u003c\/strong\u003e\n    These models share the same 6V battery bay, connector pin-out, and BMS communication protocol. One cell fits across the range without modification or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on compatible camera hardware. The BMS accepted the cell cleanly, voltage held steady through mid-cycle, and the protection circuit tripped correctly at low-voltage threshold — no false cutoffs detected.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle BMS acceptance:\u003c\/strong\u003e\n    On initial install, complete one full charge cycle through the camera body or OEM charger before heavy shooting. Some Fuji camera BMS firmware maps the discharge curve during that first cycle — skipping it can cause the battery indicator to read inaccurately for the first several uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash not fully recycling between shots on a fresh battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eFlash capacitor recharge pulls a short, high-current burst from the cell each time. A Ni-MH cell that hasn't completed its first charge cycle may sag briefly under that demand, slowing recycle time. This is not a faulty cell — it's the cell operating before its electrolyte has fully conditioned. After two or three complete charge and discharge cycles, internal resistance drops and recycle speed normalises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the camera display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe camera's fuel gauge maps voltage thresholds to percentage bands calibrated against the original cell's discharge curve. A new Ni-MH cell discharges slightly differently until it's been cycled a few times, which causes the indicator to skip levels or jump backward. This is a display mapping issue, not a capacity fault. Run two full charge-to-discharge cycles and the indicator will track more accurately against the actual cell state.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333905514586,"sku":"BWCS-NP66-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333905547354,"sku":"BWCS-NP66-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333905580122,"sku":"BWCS-NP66-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP66_1.webp?v=1778213590","url":"https:\/\/batteryweb.com\/products\/fuji-8ff60-replacement-battery-6v-4200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}