{"product_id":"fuji-vmbpl30a-replacement-battery-74v-2900mah-li-ion","title":"Fuji VMBPL30A Compatible Battery 7.4V 2900mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eFuji VMBPL30A \/ VMBPL60A — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 2900mAh lithium-ion cell that replaces the original battery in Fuji cameras using the VMBPL30A or VMBPL60A battery designation. It delivers the same voltage rail the camera body expects, keeping the shutter, sensor, and display running through extended shoots. Capacity is rated at 21.46Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVMBPL30A and VMBPL60A platform:\u003c\/strong\u003e\n    Both model designations share the same 7.4V nominal voltage and connector format. The camera's BMS reads cell voltage during charge to authenticate the pack — a matching voltage rail is what allows this cell to clear that check without triggering a rejection flag.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on bench equipment, monitoring BMS handshake, cutoff behaviour at low cell voltage, and charge acceptance. The cell reached rated capacity within two full cycles and held cutoff voltage within spec.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation in the camera body:\u003c\/strong\u003e\n    Run the first full charge cycle with the battery seated inside the camera, not in a third-party external charger. Some Fuji BMS implementations write an initialisation flag during in-body charging that anchors the battery-remaining percentage display to the new cell's discharge curve.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy flash recycling slows down near the end of a charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eAs cell voltage drops toward its lower threshold, the current available to recharge the flash capacitor between shots decreases. The capacitor takes longer to reach full charge, which extends the recycle delay you see on screen. This is normal electrochemistry — it is not a fault with the battery or the flash unit. If recycle time is noticeably longer than normal, check cell voltage: anything below 6.8V under load means the cell is close to BMS cutoff and needs charging.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the camera display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe camera maps its battery indicator to a voltage-threshold table calibrated to the original cell's discharge curve. A new replacement cell may discharge along a slightly different curve, causing the camera's indicator to skip levels or jump backwards. This is a display calibration issue, not a capacity fault. Run two full charge and discharge cycles inside the camera body — most Fuji BMS implementations recalibrate the threshold table after repeated cycles, stabilising the readout.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333668765786,"sku":"BWCS-SVD250MC-1","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333668798554,"sku":"BWCS-SVD250MC-2","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333668831322,"sku":"BWCS-SVD250MC-3","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SVD250MC-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/fuji-vmbpl30a-replacement-battery-74v-2900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}