{"product_id":"gardol-gam-e-331-li-replacement-battery-18v-2000mah-li-ion","title":"Gardol GAM-E 33\/1 Li Replacement Battery 18V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGardol GAM-E 33\/1 Li — 18V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V 2000mAh (36Wh) lithium-ion battery for the Gardol GAM-E 33\/1 Li cordless garden tool. It slots into the same battery port as the original pack and runs on the same 18V rail. Fits the GAM-E 33\/1 Li directly — no adapters required.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGAM-E 33\/1 Li platform fit:\u003c\/strong\u003e\n    The GAM-E 33\/1 Li uses an 18V Li-ion pack with a specific connector geometry and BMS handshake. This battery matches that voltage rail and connector arrangement, so the tool's protection circuit recognises it at startup without throwing a fault code.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the bench, monitoring the BMS response to inrush current at trigger pull. The overcurrent threshold held correctly — no nuisance trips on cold start or initial load engagement.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst two cycles on the GAM-E 33\/1 Li:\u003c\/strong\u003e\n    Run the tool at half load for the first two cycles before pushing maximum torque. This lets the BMS log the motor's inrush current signature and calibrate its overcurrent protection thresholds before you hit it with full hedgerow resistance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on motor-start inrush in the GAM-E 33\/1 Li\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on a cordless garden tool, the motor draws a sharp current spike before it reaches running speed — often three to five times the steady-state draw. On a new or cold battery, the BMS may read that spike as an overcurrent event and cut the output rail. This is more likely at temperatures below 10°C, where internal cell resistance rises and the voltage sag under inrush looks worse to the BMS. If the tool cuts out immediately on trigger pull and recovers after a second, that is the cause — not a faulty battery. Let the pack warm to room temperature and engage the blade gradually on first start.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising the pack after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells that have sat unused for several months can drop below the charger's acceptance voltage — typically around 2.5V per cell. When this happens, the charger sees a voltage too low to confirm the pack is safe to charge, so it stalls or blinks a fault pattern instead of starting a charge cycle. The fix is a recovery charge: some chargers have a trickle or recovery mode that brings the pack up slowly to the acceptance threshold. If yours does not, check that resting cell voltage is above 2.8V per cell before connecting — below that, the pack needs a charger with a dedicated recovery function.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416012128346,"sku":"BWCS-EHX184PW-1","price":61.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416012161114,"sku":"BWCS-EHX184PW-2","price":71.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416012193882,"sku":"BWCS-EHX184PW-3","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EHX184PW_1.webp?v=1779759462","url":"https:\/\/batteryweb.com\/products\/gardol-gam-e-331-li-replacement-battery-18v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}