{"product_id":"garmin-010-01561-00-replacement-battery-38v-4500mah-li-polymer","title":"Garmin fēnix 5X Plus Replacement Battery 3.8V 4500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGarmin fēnix 5X Plus — 3.8V Li-Polymer Replacement Battery (361-00093-00)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V 4500mAh Li-Polymer cell replaces the original battery in the Garmin fēnix 5X Plus and compatible variants including 010-01561-00, 010-01561-20, A02895, and DGL51. It matches the OEM dimensions at 90.70 x 61.80 x 5.00mm and connects directly to the existing battery terminals inside the watch housing. Voltage and capacity figures come from product data — not estimated from third-party sources.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003efēnix 5X series compatibility:\u003c\/strong\u003e\n    These models share the same battery bay geometry, connector orientation, and BMS voltage threshold. The 3.8V nominal rail is what the watch's power management IC expects — substitute a mismatched cell and the charge circuit will not negotiate correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the fēnix 5X platform and confirmed the BMS accepted the cell without triggering fault codes. The charge IC stepped through trickle, constant-current, and constant-voltage phases cleanly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap satellite initialisation:\u003c\/strong\u003e\n    After fitting this cell, power the watch on outdoors and let it acquire a satellite fix before using navigation. A cold start after full power removal takes 5–10 minutes for first fix. Subsequent warm starts drop back under a minute once almanac data is cached.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGPS accuracy reduced when battery level drops below 20%\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe fēnix 5X Plus manages power across multiple subsystems — GPS receiver, barometric altimeter, heart rate sensor, and display backlight. At low battery states, the watch reduces receiver sensitivity to protect remaining charge for core timekeeping functions. This appears as position drift or wider accuracy circles on the map. Keeping the battery above 20% during active navigation avoids the receiver stepping down.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWatch shuts off without warning before the battery indicator reaches zero\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the battery indicator is calibrated to the original cell's discharge curve. A new or aged cell with a slightly different curve causes the voltage to drop sharply at the low end before the display has time to show a warning. The shut-off threshold on the fēnix 5X is around 3.2V — the indicator may still show one bar when the cell actually hits that floor. Run two or three full charge-discharge cycles to let the watch recalibrate the capacity estimate against the new cell's actual curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377556095066,"sku":"BWCS-GMD510SL-1","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377556127834,"sku":"BWCS-GMD510SL-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377556160602,"sku":"BWCS-GMD510SL-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GMD510SL_1.webp?v=1778771653","url":"https:\/\/batteryweb.com\/products\/garmin-010-01561-00-replacement-battery-38v-4500mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}