{"product_id":"garmin-edge-explore-2-replacement-battery-37v-750mah-li-ion","title":"Garmin EDGE Explore 2 Replacement Battery 3.7V 750mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eGarmin EDGE Explore 2 \/ Dezl OTR700 — 3.7V Li-ion Replacement Battery (361-00056-12)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 750mAh Li-ion cell that replaces the original battery in the Garmin EDGE Explore 2 GPS cycling computer and the Dezl OTR700 GPS navigator. Both devices use the same OEM part number 361-00056-12. Dimensions are 48.00 × 34.00 × 4.50mm — verify these against your original cell before fitting.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEDGE Explore 2 and Dezl OTR700 compatibility:\u003c\/strong\u003e\n    Both devices draw from the same 3.7V single-cell architecture and use an identical connector footprint and protection circuit pinout — that is why one cell covers both models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the cell through charge and discharge cycles on the EDGE Explore 2 platform. The BMS accepted a standard CC\/CV charge profile without fault flags, and the protection circuit tripped correctly at the low-voltage threshold before cell damage could occur.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCold-start GPS initialisation after fitting:\u003c\/strong\u003e\n    After installing this cell, power the device on outdoors with clear sky view and let it run until satellite lock is confirmed. A full power interruption clears the GPS receiver's ephemeris data, so the first fix after a battery swap can take 5–10 minutes — subsequent fixes will be under a minute once the almanac is rebuilt.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the EDGE Explore 2 shuts off without a low-battery warning\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe on-screen battery indicator on the EDGE Explore 2 is calibrated against the original cell's discharge curve. When a new cell is fitted, the device's fuel gauge hasn't yet mapped its capacity — the indicator reads inaccurately for the first few full charge and discharge cycles. The device can hit its internal voltage cutoff threshold at 3.0V per cell before the visual indicator reaches the empty mark, causing a sudden shutdown. Run two or three complete charge-to-discharge cycles to let the gauge recalibrate.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSaved routes missing from EDGE Explore 2 after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe EDGE Explore 2 stores routes and course data in flash memory, which is non-volatile and does not depend on battery power to retain data. However, if the device was not shut down cleanly before the battery was removed, any unsaved activity or in-progress route state held in RAM will be lost. Saved courses pre-loaded via Garmin Connect or BaseCamp are unaffected. To recover, reconnect to Garmin Connect and re-sync — your course library will repopulate from the cloud.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377573331034,"sku":"BWCS-GME200SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377573363802,"sku":"BWCS-GME200SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377573396570,"sku":"BWCS-GME200SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GME200SL-1.webp?v=1778771653","url":"https:\/\/batteryweb.com\/products\/garmin-edge-explore-2-replacement-battery-37v-750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}